Search Results for "usb linux mint"
Sort By:
Showing 24 open source projects for "usb linux mint"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
1
dfu-util
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB. -
2
Alt-F
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure... -
3
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
4
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
5
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At... -
6
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
7
embKernel
C++ embedded RTOS,TCP/IP,TLS,FAT,USB,PERIPHERALS,...
Aim of embKernel is to produce an unified C++ source for embedded devices (cortex-M uC for the time being) which includes: -RTOS -TCP/IP stack -TLS (Work in progress) -FAT32 file system -USB stack -Drivers for common uControllers peripherals See the wiki pages for more information. -
8
imgFlasher
Flash OS images to sdcards and usb drives
imgFlasher has been built specifically for Embedded and IoT developers in order to flash OS images on SD cards and USB drives. Made primarily for Raspbian, Ubuntu, Debian, Yocto-based images but works with any kind of Linux distribution. imgFlasher is a portable software that doesn't require any installation. The process of flashing OS with imgFlasher is super simple and requires just 3 steps. (1) Choose img/zip file. (2) Choose drive to flash on -
9
rims-arduino-library
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is... -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
COFILOS
A Development Framework for Coldfire
Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO... -
11
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
12
XRF Config
Cross platform configuration tool for Ciseco XRF radio devices
A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it. -
13
Em::Blocks STM32F4-Discovery USB CDC
Template Virtual COM Port Project
Template Em::Blocks project for the STM32F4-Discovery board as USB virtual com port. Using the standard peripheral library (not the new HAL). No board specific headers are used. Get the driver here: http://www.st.com/web/en/catalog/tools/PF257938 -
14
Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.
-
15
SARK110 SDK
SDK for the SARK-110 Antenna Analyzer
The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application.... -
16
Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.
-
17
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
18
DruidBSD is a FreeBSD micro-distribution that supports CD/DVD, USB, and HD booting into a Live BSD Distribution.
-
19
BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.
-
20
SpiffChorder
FW and HW design for a 7-key chording keyboard
Spaceman Spiff's Chording Keyboard Experiment (or SpiffChorder for short) is an experimental platform for creating a USB chording keyboard. A chording keyboard or Chorded keyboard is an input device where characters can be typed by pressing multiple keys at the same time. A popular design is the 7-key chorder, where one key is used for each of the index finger, middle finger, ring finger and pinky, and 3 keys for the thumb. This can be used with either the left or right hand (or a chorder... -
21
Metano Linux is a GNU/Linux distribution made to run in mobile devices and PDA's.
-
22
Teuton Preinstalled Environment (TPE)
Alternative PE to rescue, hack or troubleshoot your machine or network
TeutonPE is inspired by PortableApps.com combined with a PeBuilder compiled Boot USB / CD. Programs can be used, even when there is no OS installed. BB4win is used for Live Menu and as the default Shell.All Plugins are also BartPE & XPE compatible -
23
Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.
-
24
KinectStreamer
Streams data from 3D cameras over a network.
This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller...
- Previous
- You're on page 1
- Next
