Search Results for "card"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

The KhadashPay project is my attempt to make a payment system from scratch. As for the customers of the store where the KhadashPay is deployed, Khadash pay doesn't keep any logs whatsoever and doesn't require a bit of your personal information to create an account. You can find the tutorials here: V2.0 (ESP32 Version): https://www.instructables.com/KhadashPay-V20/ V2.0 (Raspberry Pi Pico Version): https://www.instructables.com/KhadashPay-V20-Raspberry-Pi-Pico-Version/ V3.0...

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

This is an Arduino Library for the Advatel TCD226R Ledboard (160 cols x 7 Rows Red Leds). This library allows several text transitions and includes a demo that supports both serial and SD Card input.

...System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

Converter from DOS-exe (MZ format) files to ROM-able (*.rom format), suitable for loading to absolute addresses. Can be used for create BIOS extenders for I/O card and another soft for x86-based embedded systems for big length files (more, than 64K).