Search Results for "test hardware"

...Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

WARNING: DRAFT VERSION FOR HARDWARE TEST PURPOSE! The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. ...

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and...

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.