Search Results for "tasks"

The AWS IoT Jobs library helps you notify connected IoT devices of a pending Job. A Job can be used to manage your fleet of devices, update firmware and security certificates on your devices, or perform administrative tasks such as restarting devices and performing diagnostics. It interacts with the AWS IoT Jobs service using MQTT, a lightweight publish-subscribe protocol. This library provides a convenience API to compose and recognize the MQTT topic strings used by the Jobs service. The library is written in C compliant with ISO C90 and MISRA C:2012, and is distributed under the MIT Open Source License. ...

Goal: test of tech01 portability to armv7m architecture Target board: NXP FRDM-K28F

scmRTOS is tiny Real-Time Preemptive Operating System intended for use with Single-Chip Microcontrollers. scmRTOS is capable to run on small uCs with as little amount of RAM as 512 bytes. The RTOS is written on C++ and supports various platforms.

...It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM. The one task LED blink example only uses 5 bytes of RAM and 476 bytes of program memory for the whole program.

...Each task is activated either to be run in parallel (fork) with other active processes in the system or subordinated to the caller task, thus blocking it and creating a hierarchy of tasks. Execution of processes can be preemptive or non-preemptive and, among those with the same priority, a round-robin turn is performed. This operating system can be used to illustrate these concepts and can also be used to suport the execution of some embedded systems.

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and...

...Leds and programs can be manipulated on the fly, in the program or from serialusb. A very simple task scheduler call the update of leds every 5ms, leaving plenty of processor for other tasks.