Search Results for "engineering software"
Sort By:
Showing 59 open source projects for "engineering software"
View related business solutions-
Gemini 3 and 200+ AI Models on One PlatformBuild, govern, and optimize agents and models with Gemini Enterprise Agent Platform.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
2
ebye
Embedded by examples
Building of embedded systems from scratch including their cross-toolchain and using virtual and/or emulated machines as pratical examples. -
3
Format Converter - Intel HEX, Elf32, BIN
File Format Converter Between HEX / BIN / ELF
Intel HEX File Processing Software File Format Converter Between HEX / BIN / ELF The source code was created and debugged in the eS development environment (for Linux and Windows) and is an example of its use. https://esolution.sourceforge.io/ -
4
QP Real-Time Event Frameworks & Tools
Real-Time Event Frameworks based on active objects & state machines
QP real-time event frameworks (RTEFs) provide lightweight, modern, event-driven architecture based on asynchronous Active Objects (Actors) and Hierarchical State Machines. The matching QM model-based design tool and other host-based tools complement the QP frameworks by supporting graphical modeling, code generation, software tracing, and unit testing for event-driven embedded software. Visit https://www.state-machine.com for more information. The QP RTEFs can run on bare-metal... -
Secure File Transfer for Windows with Cerberus by RedwoodCerberus supports unlimited users and connections on a single IP, with built-in encryption, 2FA, and a browser-based web client — all deployable in under 15 minutes with a 25-day free trial.
-
5
Sunlight Readable GUI (SuRG)
Open Source platform with FreeRTOS, processor abstraction
Firmware and Drivers for FDI’s SuRG Family of Sunlight Readable GUI products. Developed by Future Designs, Inc. at https://www.teamfdi.com FDI Support: https://teamfdi.com/forums SuRG v1.00.000: STM32CubeIDE v2.1.1, FreeRTOS v11.2, LVGL v8.3.4, Project Generator, SEGGER RTT and Systemview -
6
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
7
comFramework
Framework for CAN communication interfaces including code generator
comFramework presents a flexible, widely customizable CAN communication interface for embedded applications; it covers the CAN stack down to the hardware driver. Signal based application code is linked to the frame based HW abstraction layer. The interface imposes easy to fulfill requirements on the integration environment and will fit in most embedded platforms. A powerful code generator auto-codes those parts of the interface, which depend on your specific CAN network databases;... -
8
A20_sdk
A simple armv7h sdk
This is my sdk for usage with slackware on A20 devices like bananapi, cubietruck and olimex-som. For more info see https://github.com/tjohann/a20_sdk . -
9
P89 Serial Programmer
Program NXP P89V51RD2 from your favorite Unix system
P89 Serial Programmer (p89pgm) is a simple command-line based serial In-System Programmer for Philips (NXP) P89V51RD2 microcontroller. This programmer is designed to be minimal, and has no external software dependency. Supported input formats are Intel HEX and raw binary file. This programmer is designed for GNU/Linux and Unix-like platforms; but it also runs on Microsoft Windows as well, thanks to Cygwin porting library. -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
Tool to create SVF files from HEX files for Atmel microcontrollers, similar to the closed-source avrsvf.exe application available from Atmel. You should be able to compile the tool on any platform with a C compiler, like Linux, Mac OS X, FreeBSD.
-
11
CTREE Graphic Tree Generator for C
An analysis tool showing the structure of a C program
CTREE is a command line utility providing analysis tools useful to software engineers tasked with tracking down problems or verifying a program's soundness. It is also an aid to understanding the structure of unfamiliar programs. As it works with standard C it finds most of its utility in embedded systems and older software. CTREE comes with a comprehensive manual. CTREE is is released by Cleveland Engineering Design, LLC - developer of the CoRTOS cooperative RTOS https://sourceforge.net/projects/cortos-simple/ and PRTOS pre-emptive RTOS https://sourceforge.net/projects/prtos-preemptive-rtos/ V 1.01 - fixed bug that could cause lock-ups or garbage output with some coding styles. -
12
-
13
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
14
Moebius
Raspberry PI minimal linux distribution
Moebius Linux is a Raspberry PI armhf distribution built from scratch and targeted to have a small footprint. 20Mb of RAM (with ssh) and a 128Mb SD are minimum requirements. Size, speed and optimizations are main goals for this distro, take a look at it and contribute if you like it -
15
NtdIsp
A system for programming LPC, STM32 and possible others devices.
This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported. -
16
lpACLib
An Open-Source Library for Low-Power Approximate Computing Modules
The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source... -
17
MGSyn
MGSyn - Automatic Synthesis for Industrial Automation
MGSyn (Model, Game, Synthesis) is an open-source tool which integrates game-based synthesis into model-driven development for industrial control and automation. It is served for research and educational purposes. MGSyn has been originally developed by Department of Informatics (Unit 6), TU München and fortiss GmbH and is now maintained by fortiss GmbH. The software is released under the GNU General Public License Version 3.0 (GPLv3). Please download the tutorial for step-by-step... -
18
Hex File Loader
A software for upload .hex files to ATMEGA328P and compile .asm files
-
19
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
20
COFILOS
A Development Framework for Coldfire
Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO... -
21
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
22
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
23
The GoodFET is an open source JTAG programmer based upon the Texas Instruments Flash Emulation Tool. While retaining partial compatibility with the TI design, the eventual goal of this project is standalone firmware with no proprietary components.
-
24
Em::Blocks STM32F4-Discovery USB CDC
Template Virtual COM Port Project
Template Em::Blocks project for the STM32F4-Discovery board as USB virtual com port. Using the standard peripheral library (not the new HAL). No board specific headers are used. Get the driver here: http://www.st.com/web/en/catalog/tools/PF257938 -
25
Hydroponic Automation Platform (HAPI)
Technologies for automating food production on various scales
The Hydroponic Automation Platform Initiative (HAPI) develops and provides hardware and software components for automating food production using hydroponic, aquaponics, and precision agriculture techniques. High-yield production in urban settings is one of the primary goals. Artifacts include hardware design (mainly Arduino-based), firmware, management software and reporting modules.
