Search Results for "check"

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library

This application calculates combinational and sequential SCOAP parameters (CC0, CC1, CO, SC0, SC1, SO) and Testability Index parameter from a ISCAS89 netlist. It also performs the PODEM algorithm to check testability of a net against a single stuck at 0 or 1 fault.

...It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library.

...Concerning performance, the tool enables to check all examples in the PVS Bernstein testsuite within a second, which can be an order of magnitude faster than some other tools such as QEPCAD or REDLOG. Although JBernstein uses double, it offers automatic error-estimation capabilities (experimental) so that the generated result is correct (the solver may return unknown when the error-estimate is too large)

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

...Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.