Search Results for "virtual device driver"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

AVR-HV is high voltage parallel programmer for Atmel AVR series microcontrollers. AVR-HV allows programming, reading, verifying and configuring AVR microcontrollers with its high voltage programming interface and it connected with PC using USB interface.

Template Em::Blocks project for the STM32F4-Discovery board as USB virtual com port. Using the standard peripheral library (not the new HAL). No board specific headers are used. Get the driver here: http://www.st.com/web/en/catalog/tools/PF257938

The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application. ...

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

Tfpd aims to implement a test software for the small-sized FPD(Flat Pannel Display). The test software is based on the linux and it consists of device drivers and applications.

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

"flashmanager" is a software to manage the flash partitions from user-space. This uses an underlying driver layer for interaction with the flash device.