Search Results for "flash card"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

Porting Android to the iPAQ 200/210/211/212/214 or equilivalent. It has a 4-inch VGA Screen (TFT LCD display), resistive touchscreen, WiFi, Bluetooth, SD/MMC, CF. Originally it is running Windows Mobile 6 Classic. For help, see README files and the wiki. This project is in Alpha state, that means it is not suitable for daily usage unless developing for the project. NOT FOR THE FAINTHEARTED AND/OR COMPUTER IDIOTS!

NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards. To be able to use NetFlash100 you need: 1. ATNGW100 board with a working u-boot. 2. Ethernet and serial terminal connections. 3. A SD card (must be more than 40MB) Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available flash devices on the system. ...