Search Results for "ATmega"

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases.

motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves its three axes would be e.g. ...

AVR-HV is high voltage parallel programmer for Atmel AVR series microcontrollers. AVR-HV allows programming, reading, verifying and configuring AVR microcontrollers with its high voltage programming interface and it connected with PC using USB interface.

Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM.

Kmax 8bit microkernel for AVR ATMega MCUs written in assembler (AVRASM & GCC compatible) with a C API. Core features include priority-based preemptive round-robin scheduling, mutexes, fifos and semaphores with a focus on speed and ease of use.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

Implements read only access to ntfs and fat. It is targeted for the use in micro controllers (e.g. VNC2, ATMega) with few KBytes memory.