Search Results for "network"

The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)...

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

SUSFinder is a utility to assign IP address and flash firmware to ASUS WL-500G Premium router booted in recovery mode on local network, in the case that you didn't know router's IP address settings beforehand. This utility do essentially the same thing as ASUS Firmware Restoration Utility, except that it relies on the external 'atftp' program to do the TFTP firmware flashing part. Currently, SUSFinder is written in ANSI C with POSIX API, thus should be portable to most Unix-like platform (including Cygwin).

Controlling Model Railroad via Networks "Lanbahn" Concepts - intelligent end devices - all with a network, wlan or other sophisticated interface. - can be operated without a central station - no complex binary protocols - communications via multicast UDP messages - decoders can advertise their capabilities via zeroconf/avahi/bonjour protocol. - raspberry pi as one hardware platform - tinkerforge IO bricklets for turnout and signal control

ONE-NET is both an open standard and an implementation of a wireless network protocol. The protocol was originally intended for home automation but has many more applications where low power, secure communications are required.

Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.

TeutonPE is inspired by PortableApps.com combined with a PeBuilder compiled Boot USB / CD. Programs can be used, even when there is no OS installed. BB4win is used for Live Menu and as the default Shell.All Plugins are also BartPE & XPE compatible

A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.

Visualization of ZigbeeNET API Data Packets in LINUX Implemented a My-SQL database based visualization interface in Linux for ZigbeeNET API Applications

This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller that is able to use these kinds of cameras can be loaded with this software to send the image and depth data from the kinect over the network to the other controller. ...