Search Results for "c source code" - Page 2
Sort By:
95 projects for "c source code" with 2 filters applied:
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
Cut Data Warehouse Costs by 54%BigQuery delivers 54% lower TCO with exabyte scale and flexible pricing. Free migration tools handle the SQL translation automatically.
-
1
OBSOLETE - Please proceed to new repo: https://github.com/nasa/osal This project will be closed in the near future ALERT: The osal-4.2.1a release package is now available. This release package fixes a unit test makefile to use Modules.mak rather than using ut-modules.mak directly. The top-level readme.md file was also updated to add missing information. The OS Abstraction Layer (OSAL) project is a small software library that isolates embedded software from the real time...
-
2
serlogger
serial logging tool with time stamps and hotkey and automation support
a flexible serial logging tool, runs on GNU/Linux, which can be useful for timing analysis and logging capture of embedded system development. -
3
CMAKE build enviroment for CMSIS MCUs
CMAKE build enviroment for LPC2000 and LPC17xx Cortex MCUs
The goal of project is to build CMSIS like environment for LPC2000 series MCU and to write RTOS for LPC2000 and Cortex Microcontrollers -
4
SUSFinder
Set recovery mode IP and flash firmware to ASUS WL-500gP router
SUSFinder is a utility to assign IP address and flash firmware to ASUS WL-500G Premium router booted in recovery mode on local network, in the case that you didn't know router's IP address settings beforehand. This utility do essentially the same thing as ASUS Firmware Restoration Utility, except that it relies on the external 'atftp' program to do the TFTP firmware flashing part. Currently, SUSFinder is written in ANSI C with POSIX API, thus should be portable to most Unix-like... -
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
5
A Linux tool for the MikroElektronika (www.mikroe.com) AVRprog2 programming hardware. We have migrated to Github! https://github.com/avrprog2/avrprog2-code
-
6
Serial Wire Debug (SWD) Open Library for low level Debug Access Port (DAP) on new ARM Cortex CPU devices. PROJECT HAS MOVED TO https://GitHub.com/CeDeROM/LibSWD PLEASE UPDATE YOUR LINKS! :-)
-
7
XRF Config
Cross platform configuration tool for Ciseco XRF radio devices
A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it. -
8
UFFS: Ultra-low-cost Flash File System, designed for NAND flash working in embedded system. UFFS typically consumes less then 200K ram for 1Gb(page 512)/4Gb(page 2K) NAND flash. It supports direct flash interface, works with or without OS.
-
9
Hydroponic Automation Platform (HAPI)
Technologies for automating food production on various scales
The Hydroponic Automation Platform Initiative (HAPI) develops and provides hardware and software components for automating food production using hydroponic, aquaponics, and precision agriculture techniques. High-yield production in urban settings is one of the primary goals. Artifacts include hardware design (mainly Arduino-based), firmware, management software and reporting modules. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
PCD – Process Control Daemon is a light-weight system level process manager, designed for Embedded Linux based products. The PCD is used for starting the system in a synchronized manner, control and monitor processes and recover from crashes.
-
11
itemis CREATE - formerly known as Yakindu Statechart Tools (SCT) - is a tool for the specification and development of reactive, event-driven systems with the help of state machines. It consists of an easy-to-use tool for graphical editing and provides validation, simulation and code generators for different target platforms. Visit http://www.statecharts.org for more information! !! YAKINDU SCT HAS MOVED !! DOWNLOAD FROM https://info.itemis.com/download-yakindu-statechart-tools
-
12
-
13
Lanbahn
Controlling Model Railroad via Networks
Controlling Model Railroad via Networks "Lanbahn" Concepts - intelligent end devices - all with a network, wlan or other sophisticated interface. - can be operated without a central station - no complex binary protocols - communications via multicast UDP messages - decoders can advertise their capabilities via zeroconf/avahi/bonjour protocol. - raspberry pi as one hardware platform - tinkerforge IO bricklets for turnout and signal control -
14
OnPosix
C++ library for POSIX systems.
OnPosix is a minimal C++ library that allows to speed-up development on embedded Posix platforms (e.g., Embedded Linux). Code available at https://github.com/evidence/linux-onposix -
15
FreeOSEK RTOS
Project has been move to https://github.com/ciaa/Firmware
The project is not more active, we have fix a lot of issue and perform many improvements. These are now deliverd as part of a new project: https://github.com/ciaa/Firmware ---- FreeOSEK is a scalable solution for embedded system. FreeOSEK OS is based on OSEK RTOS specification (OSEK-VDX). visit us in: http://opensek.sourceforge.net -
16
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
17
OOBD supports a self-programable Tool for Vehicle Onboard Diagnostics (OBD) for various platforms like the Windows-Desktop, mobile Phones and Smartphones Please note that we are actual moving this project over to oobd.googlecode.com. The software source code repository is already moved, other areas will follow.
-
18
fslurp
Fronius data tool for Linux
fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in... -
19
SERiaM
Unified desktop and embedded Serial port API
A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms. -
20
A C++ based lightweight, non-invasive SCA (Service Component Architecture) runtime. Optimized for the use in the embedded domain. We are proud to announce release 0.8 of Trentino Release 0.8 adds a major feature to Trentino. With Service discovery, configuration, deployment and operation of Services on devices is made simple and cost efficient.
-
21
Linux for Beagleboard-xm
A Tailored Small Linux for Beagleboard-xm
Beagleboard-xm is a powerful chip with a cortex-A8 CPU and a DSP. I have the plan to build an OCR gadget using it with Linux. As a by product I will post my tailored Linux kernel and u-boot, and all relevant stuff here, from now on. I was shocked by the blocking of Chinese citizens from accessing some of the contents on sourceforge. I deeply regret the outrageous action initiated, even though I fully understand the reasoning behind it. -
22
dasm430
A disassembler and a simulator for the MSP430 CPU
A disassembler and a simulator for the MSP430 CPU. Both programs only read TI-TXT files. Licensed under the Simple Public License (SimPL) 2.0. For full license information, please read license.txt. Compiled executables are available for Windows and Mac OS X. Linux users will have to compile their own binaries. Instructions for compilation are included in README.txt. A Qt-based GUI is available for sim430. Binaries only for OS X, for now. Source files can be found in src/qt folder. -
23
openAut
Open Source Hardware For Industrial Automation
This project is aimed at producing open source hardware for real time use in industrial automation. This project will have a few sub-projects that will focus on individual hardware for various industrial purpose. Some of the sub-projects will be of type Field-IO Modules development, Analog-IO Module development etc. -
24
The clash New Generation now focuses on making a versatile OS environment for embedded systems allowing users to customize the resulting platform into routers, firewalls, 3G gateways, access points, emergency rescue system or even diskless clients.
-
25
lpcprog
LPC214x FTDI(UART) programmer
