Search Results for "xcopy-gui"
Sort By:
Showing 27 open source projects for "xcopy-gui"
View related business solutions-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
mGSTEP
Objective-C embedded development libraries
Designed for use in embedded devices the mGSTEP libraries implement a subset of NeXT's OPENSTEP specification which has evolved into Apple's Cocoa Objective-C frameworks. The internal graphics rasterization supports rendering to an X11 or Linux frame-buffer based GUI. -
2
MenuDesigner
A GUI system for embedded systems.
A small GUI system for monochrome and color LCDs suitable for embedded systems with very limited system resources (like 8 bit microcontrollers). Comes with a graphical editor for creating a menu. Runs on Linux and Windows (Cygwin is recommend for using all features). Samples showing the usage on a PC, AVR, and STM32 microcontrollers are included. -
3
RoboDude is a programming tool for AVR microcontrollers. The graphical interface is easy to use, because it works with xhex-files (xml files containing ihex and srec sections, mcu information and fuse bit settings). The GUI uses the avrdude library. The binary files are included in the NiboRoboLib Package!
-
4
AVRpal.NET
A Windows based GUI for popular avrdude command line utility
A Windows based GUI for popular avrdude command line utility for AVR microcontroller Programming.It has got many features with a lightweight easy to understand interface. AVRdude is provided with it. It previously used LibUSBdotnet but now it uses LibUSBK for compatibility(http://libusbk.sourceforge.net/UsbK3/index.html) .Supports only USBasp programmer but if you can code,you can change it to work with your programmer.Feedback is necessary friends -
Retool your internal operationsBuild internal software that meets enterprise security standards without waiting on engineering resources. Retool connects to your databases, APIs, and data sources while maintaining the permissions and controls you need. Create custom dashboards, admin tools, and workflows from natural language prompts—all deployed in your cloud with security baked in. Stop duct-taping operations together, start building in Retool.
-
5
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
6
AudiculaPi
AudiculaPi - the tiny media server for your Raspberry Pi
AudiculaPi - the tiny media / home automation server for your Raspberry Pi 1-2B+ based on OpenWrt/ Chaos Calmer (without RPI3 support) * Minimalistic system, installed and running on a just 256MB sized SD card * AudiculaPi provides a detailed Web Browser GUI with multi language support Already preinstalled: * Homeautomation with Domoticz (http://www.domoticz.com) Tested with HW: RFXtrx433E USB 433.92MHz Transceiver by RFXCom and Z-Wave Plus USB Stick ZME_UZB1 by Z-Wave.me * MPD, Musi Player Daemon - Internet Radio / MP3 /OGG / FLAC etc. player (with LCD support based on PyDPF) * pianod * SAMBA * SSH/SFTP Server * MiniDLNA * Shairport * Avahi * OpenVPN * WebCAM Video Streaming with mjpeg-streamer * NTP client / server * WLAN client and / or access point * ... countless other gadgets, use web based packet manager powered by OpenWrt repository ! -
7
Beagle Entertainment System
Turns the BeagleBone Black into a Nintendo-based retrogaming console.
...Just connect your BES-enabled BeagleBone Black to your network and you can use BES's Node.js web interface to add or remove ROMs, configure gamepads, and edit ROM descriptions for the front-end GUI. There's no need to hand edit configuration files or manually copy ROM files onto the microSD card! BES source: https://github.com/hendersa/bes BES web interface: https://github.com/hendersa/bes-config-node BES kernel device tree: https://github.com/hendersa/bes-dtb-rebuilder -
8
rect_tree
Rectangular Split, Addition and Subtraction , and Tree Structure
This project try to implement the rectangular calculation, such as split, addition, subtraction, it is base on line split. Also a Tree structure handler is provided in this project, together they can use to deal with the window split and window relationship in GUI(Graphical User Interface), I hope so :-p -
9
WinDS
Windows XP reimplemented on Nintendo DS
...The New Beta 0.95 is out, it features - 52 Classes that are already available within Lua - 25 different types of user interface classes - 8 different predefined dialogs which makes it the perfect GUI sandbox for DS. PS: More time without update means: next update will have even more improvements, as i am still developing ;) -
MyQ Print Management SoftwareBoost your digital or traditional workplace with MyQ’s secure print and scan solutions that respect your time and help you focus on what you do best.
-
10
LUAndroid
Embedded operating system that runs LUA scripts
The aim of this project is to provide an easy to use fast prototyping platform for embedded systems. The hardware is targeted to be small, DIP package hybrid technology chip. In the current phase it runs on Microchip demo boards. http://www.microchip.com/dm320005-2 http://www.microchip.com/dm320006 and SunDisk Ultra 16Gb SDcard -
11
AVR HV Programmer
High voltage parallel programmer for AVR microcontrollers.
AVR-HV is high voltage parallel programmer for Atmel AVR series microcontrollers. AVR-HV allows programming, reading, verifying and configuring AVR microcontrollers with its high voltage programming interface and it connected with PC using USB interface. -
12
XRF Config
Cross platform configuration tool for Ciseco XRF radio devices
A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it. -
13
NgGUI is an open source GUI system wrote by C/C++. It is portable for embedded system which based on Linux/ucLinux or VxWorks or WinCE. It can run on the framebuffer or directFB and SDL. iTerminal is a web browser based on NgGUI.
-
14
BitBurner
BitBurner AVR Programmer, a full and complete AVRdude GUI for Windows.
BitBurner AVR Programmer is a graphical front end for the command line program AVRdude. It is used to transfer programs and data to the Atmel AVR family of microcontrollers. BitBurner is an attempt at a single AVRdude GUI programming solution for AVR developers and experimenters by providing comprehensive device support over a broad range of programming hardware. BitBurner supports all devices, memory spaces and programming hardware protocols provided by the latest version of AVRdude, including support for XMEGA devices. BitBurner hosts a full-function hex editor capable of direct transfers to and from all memory spaces of all devices. ... -
15
Envmon
Server Room Environmental Monitoring
...The PCB called envmon board collects the environmental data and outputs it to a Raspberry PI. The Raspberry PI is the head unit providing network access to the data and can be configured with RRDTool/Apache for a complete GUI. -
16
dasm430
A disassembler and a simulator for the MSP430 CPU
...Compiled executables are available for Windows and Mac OS X. Linux users will have to compile their own binaries. Instructions for compilation are included in README.txt. A Qt-based GUI is available for sim430. Binaries only for OS X, for now. Source files can be found in src/qt folder. -
17
bmp2rle
Encode bitmap(bmp) file with run-length encoding
Encode bitmap(bmp) file with run-length encoding(RLE), just like RLE4 and RLE8, but extend to RLE16, RLE24 and RLE32. Usually, this project will be used in GUI of embedded system, to make the image files smaller, and save the IO bandwith. If the GUI support JPG or PNG, the compression ratio is much better than RLE, but how about the embedded system encounters both caculate limitation and IO bandwidth limitation? Try this project, I hope it can make a banlance between caculation and bandwidth. ... -
18
G4DUDE
G4DUDE a GUI for avrdude written in python
-
19
smartCOMs
smartCOM is a graphical serial device terminal.
smartCOM is a graphical serial device terminal, it's an alternative to minicom. It is aimed mainly at hardware developers who need a gui test tools to talk to their custom hardware. The GUI is written using the wxWidgets library, and using the tinyxml to save or load config. http://gnssinfo.com/2012/11/21/wiki-smartcom/ -
20
ChumbOS Launcher
ChumbOS Launcher - Native Application Launcher for Chumby
...By the way, not that it had too many shackles, don't get me wrong, but the limitation of using only flash widgets on a device having the horse power of a 450MHz full blown computer, seems to me, a bit of a waste and just a bit annoying. So, what does this application do? It enables you to design a simple Graphical User Interface (GUI) which can start and stop other applications on the Chumby. -
21
NetFlash100
Web based GUI for accessing ATMEL ATNGW100 board's flash memory.
NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards. To be able to use NetFlash100 you need: 1. ATNGW100 board with a working u-boot. 2. Ethernet and serial terminal connections. 3. A SD card (must be more than 40MB) Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available... -
22
EmbeddedGUI is a GUI library for embedded system.It is much smaller than MiniGUI and can be easily transplanted to any RTOS.It provides many graphic functions and controls such as list and tree.LCD drivers are also included.Works with ARM7,ARM9,MSP430etc
-
23
Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.
-
24
A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.
-
25
FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.
