Search Results for "servers web https"

...Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. Besides the built-in software, Alt-F also supports additional packages on disk, including ffp and Entware packages, that you can install, update and uninstall using the administering web pages Alt-F is being developed and tested on a DNS-323-rev-A1/B1, a DNS325-rev-A1, a DNS-320L-rev-A1 and on a DNS-327L-rev-A1 hardware boards. ...

uEZ(r) is an open source, embedded middleware platform providing underlying RTOS and processor abstraction features enhancing portability of application code to multiple ARM platforms with high reusability. Developed by Future Designs, Inc. at https://www.teamfdi.com Doxygen docs available at https://www.teamfdi.com/uezgui-doxygen/ FDI Support: https://teamfdi.com/forums uEZ is now available in a 7-Zip archive. The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.14.000 updates: Crossworks v4.10.8, several LPC4357 driver updates, lwIP full-duplex Ethernet with Jumbo Frames, MbedTLS, Amazon Web Services MQTT shadow demo over TSL 1.2, FreeRTOS+ additional libraries, SNMP/SNTP and TFTP/HTTP Server updates uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.15.001 updates: Documentation updates only

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

PLEASE NOTE: this project has been moved to https://piwebcam.github.io Instructionable: https://www.instructables.com/id/Fully-featured-Outdoor-Security-Camera-Bas

...Both, "docker" and "wharfie", are using a simple format to describe custom linux system configurations and rebuild those easily. Wharfie uses basically the same syntax, while it is not fully compatible. While "docker" is focusing on scalable web services, "wharfie" is focusing on embedded linux systems. With "wharfie" one can easily build a root filesystem, based on the Debian distribution from scratch. He can then configure it in an appropriate way. Wharfie moved to CODESYS Forge: https://forge.codesys.com/tol/wharfie

...It is targeted to private individuals (home automation) as well as business users (smart retail environments, ambient aware marketing, monitoring and analytics, etc). Freedomotic can interact with well known standard building automation protocols as well as with "do it yourself" solutions. It treats the web, social networks and branded frontends as first class components of the system. [GITHUB REPOSITORY] https://github.com/freedomotic/freedomotic [USERS' MANUAL] http://freedomotic-user-manual.readthedocs.io/ [DEVELOPERS' MANUAL] http://freedomotic-developer-manual.readthedocs.io/ [INTERNATIONAL COMMUNITY] https://groups.google.com/forum/#!...

AudiculaPi - the tiny media / home automation server for your Raspberry Pi 1-2B+ based on OpenWrt/ Chaos Calmer (without RPI3 support) * Minimalistic system, installed and running on a just 256MB sized SD card * AudiculaPi provides a detailed Web Browser GUI with multi language support Already preinstalled: * Homeautomation with Domoticz (http://www.domoticz.com) Tested with HW: RFXtrx433E USB 433.92MHz Transceiver by RFXCom and Z-Wave Plus USB Stick ZME_UZB1 by...

...A full system image, ready to be written to a microSD card and used as-is, is available for download. Just connect your BES-enabled BeagleBone Black to your network and you can use BES's Node.js web interface to add or remove ROMs, configure gamepads, and edit ROM descriptions for the front-end GUI. There's no need to hand edit configuration files or manually copy ROM files onto the microSD card! BES source: https://github.com/hendersa/bes BES web interface: https://github.com/hendersa/bes-config-node BES kernel device tree: https://github.com/hendersa/bes-dtb-rebuilder

Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license.

itemis CREATE - formerly known as Yakindu Statechart Tools (SCT) - is a tool for the specification and development of reactive, event-driven systems with the help of state machines. It consists of an easy-to-use tool for graphical editing and provides validation, simulation and code generators for different target platforms. Visit http://www.statecharts.org for more information! !! YAKINDU SCT HAS MOVED !! DOWNLOAD FROM https://info.itemis.com/download-yakindu-statechart-tools

Firmware for AVR/ARM target boards based on the Elektor Internet Radio and Atmel's Internet Radio AN. The Radio connects to SHOUTcast/Icecast servers and uses VS10xx chips or the Helix decoder. A HTTP server and simple LCD IF is included.

OPC layer for Mozilla platform. Web-based XUL interface + OPC data. Crossplatform framework for developing OPC servers. Opc UA Binary protocol realization.

# moonbird is a simple but powerful http server (beta) with lua 5.2, and sqlite3 embed ## inspired on a old project based on: https://www.apache.org https://www.php.org https://www.nodejs.org https://github.com/slimphp/Slim/tree/2.x https://github.com/Philipp15b/php-i18n https://redbeanphp.com/index.php https://mustache.github.io/ https://thephpleague.com/pt-br/ ## libraries/info used in this demo: https://www.lua.org https://www.lua.org/extras/5.2/ http://www.sqlite.org https://github.com/APItools/router.lua http://dkolf.de/src/dkjson-lua.fsl/home https://github.com/lunarmodules/say https://github.com/Olivine-Labs/lustache https://github.com/Tieske/date https://developer.mozilla.org/en-US/docs/Web/HTTP/Status#information_responses ## why/motivation: a simple but powerfull webserver with lua (w/ router, i18n, template, logs, ...) and sqlite3 using a simple 'handler' interface to call lua, ring, javascript or php ## image splash created

This project is software project using MCUs from Microchip and other MCU manufacturers. Currently planning on doing an SNMP agent on a few development MCU boards.