Search Results for "controls"

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

Firmware for home made ECU/PCM (Electronic Fuel Injection & ignition controller) for 2006 Ford Mustang car. It also supports vehicle's CAN bus to exchange data with smart junction box unit (gauge cluster && a/c). Project is based on megasquirt project, it uses same tuning tools (megatune/TunerStudio MS). There are three CPUs in total, so project contains three diferent firmwares for each microcontroller. Main CPU is NXP ARM7 LPC2366 running AOS operating system (also my project). Remaining...

Home Automation project, mostly heating and ventilation controls. Controls running on Single Board Computers. Framework allowing control simulation and testing.

EmbeddedGUI is a GUI library for embedded system.It is much smaller than MiniGUI and can be easily transplanted to any RTOS.It provides many graphic functions and controls such as list and tree.LCD drivers are also included.Works with ARM7,ARM9,MSP430etc