Search Results for "open source assembly software source code" - Page 10

"flashmanager" is a software to manage the flash partitions from user-space. This uses an underlying driver layer for interaction with the flash device.

With GLCD Tools you can convert windows bitmap files (bmp) to a byte array suitable for graphic LCD displays. Additionally you can create fontsets out of your system fonts for the displays. It outputs C Code which you can use in your µC project.

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

Software which runs on a gunstix overo, to contron stepper motors, and servos in such a way that they play the piano. The actual stepper motor and servo driver are done on an FPGA board from knjn.com (pluto-3).

Engrane3D is a fully working LiveCD OS powered by Slackware/Slax with a personalized set of tools to set, configure clusters, tools for hosting serving, a built-in parallel 3D renderer and a nice set of compilers and libs (SDL,MPI, Mesa).

A modular compiler for Tig in C++.

Converter from DOS-exe (MZ format) files to ROM-able (*.rom format), suitable for loading to absolute addresses. Can be used for create BIOS extenders for I/O card and another soft for x86-based embedded systems for big length files (more, than 64K).

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. ...

The Cryptofon is designed to enable safe and secure communication trough a regular PSTN line. It supports narrowband connections (~2400 bit/s and lower).

The goal of Gossamer is to provide a set of libraries & tools for distributed, fault tolerant, computing. This is done by breaking tasks up into small units which are then processed by seperate servers, which may reside locally or across a network.

An eco-system of RTSC-based embedded C/C++ components that furnish a rudimentary hardware abstraction layer comprising basic I/O and threading services which can support a wide-range of embedded platforms.

A free/libre/open-source firmware library (previously known as libopenstm32) for various ARM Cortex-M3 microcontrollers, including ST STM32, Toshiba TX03, Atmel SAM3U, NXP LPC1000 and others. Sourcecode and bugtracker can be found at http://github.com/libopencm3

Diesel Linux is the brain child from me coming up with me method to automate a WVO purification and Utility power co-generation project. While at this time it will not be Officially patented, but it will be protected by poor man's copyright.

GalaxyIP (Galaxy Intellectual Property Cores) is a project devoted to accommodate a set of IP-Cores for embedded SoC development, based on the processor code named Voyager (StarTrek and the space probes).

This project is software project using MCUs from Microchip and other MCU manufacturers. Currently planning on doing an SNMP agent on a few development MCU boards.

We are about to develop a tool(development kit) which can support developing embedded software by using USb transfer between target machine and development machine.

Software and images designed to get Ubuntu running properly on the Gumstix Overo line of Computers on Modules (COM's).

This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller...

The Virus Cure: Open Source Biomedical Nano-Technology The Virus Cure is an open source project that focuses on development of software for biomedical nano-technology. Currently we are in the planning stages but we hope to enter into development soon.