Search Results for "open source assembly software source code"

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. ...

This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. The model uses up 15% of combinational blocks and 5%...

This project is aimed at producing open source hardware for real time use in industrial automation. This project will have a few sub-projects that will focus on individual hardware for various industrial purpose. Some of the sub-projects will be of type Field-IO Modules development, Analog-IO Module development etc.

Sharp MZ800 univerzalni karta periferii 1 ----------------------------------------- Contains peripherals: emulator of FDC WD279x, RTC, single channel SIO, repository manager, LAN10Mbit Chips on the card: STM32F101, XC9356, ENC28J60, FT232RL, MAX3232

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

This project aims at creating an open-source SoC that will support the Google TV platform.

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

FPGAmer is a framework to develop embedded games. Our development platform is the Xilinx University Program Virtex-II-Pro but not limited to that. FPGAmer includes custom hardware components plus a custom software framework and some sample games.

Software which runs on a gunstix overo, to contron stepper motors, and servos in such a way that they play the piano. The actual stepper motor and servo driver are done on an FPGA board from knjn.com (pluto-3).

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. ...

GalaxyIP (Galaxy Intellectual Property Cores) is a project devoted to accommodate a set of IP-Cores for embedded SoC development, based on the processor code named Voyager (StarTrek and the space probes).