Search Results for "one-wire"

1. Comes with 200+ high level Tcl commands around SoC platform assembly 2. Easy to start - use the verilog2baya tool to convert existing SoC/SS into Baya 3. Adhoc and Interface based connections 4. Autoconnections 5. Rule based connections between component ports 6. A variety of SoC integration Methodologies 6.a. XLS/CSV Based connections 6.b.

Smart GUI to create or update IP-XACT often needed for the IP packaging. It has capability create Bus Definitions from scratch to populate BusDef library. One can create IP-XACT Component, Design or Registers by importing Ip in System Verilog/Verilog-95/VHDL, instantiate Bus Interfaces with proper port maps and attributes as needed. Smart GUI to create IP-XACT Registers, Memory Maps, Address Blocks for IP- has feature to import XLS or Verilog . It has Tcl/Python API support. ipxact2verilog - Generate Verilog module from IP-XACT definition ipxact2vhdlentity - Generate VHDL entity from IP-XACT Component definition verilog2ipxact - Generates IP-XACT definition from Verilog modules vhdl2ipxact - Generates IP-XACT definition from VHDL source ipxactcoherencycheckerverilog / ipxactcoherencycheckervhdl - Validates IP-XACT Component definition with RTL validateipxact - IP-XACT Linting tool

This Python script reads in a DXF (ascii) file and generates a PCB output compatible with PCB Designer, part of the gEDA suite. It is designed for two purposes: One is to generate a PCB snippet from a mechanical drawing (such as a board outline), the other is to produce element files from CAD drawings. PCB snippets are easily imported into an existing gEDA-PCB project using File -> Load Layout to Buffer. Generated element files are ready to use (except for special cases like no-paste flags and rounded pads).

PyPCB is a Python package for working with PCB (http://pcb.sourceforge.net) files. PyPCB can be used to create new useful tools, as footprint generators or library managers.

PhiCAD is a LGPL'd , cross-platform software intended to provide to community an eclectic suite of CAD such as EDA to solve physics problems.

GerbTool is a set of tools for modifying gerber and excellon drill files. GerbTool can be used to tile multiple gerber files as a single job, and can be run interactively or in batch mode.

Extensions to the circuit simulator Ngspice. One extension is the integration of the next generation build system SCons.

FXPyTurns-n-Layers is a graphical transformer and induction coil design aid. The application performs the physical design of the coils for transformer and induction coils to determine: the length/weight of wire required to wind a coil with the specified

A clearing house for various pieces of open source software which use the GenCAM data format for input or output of electronic interconnect (PWB, PCB, PWA, PCA) information.