Search Results for "keylogger source code"

...PICSimLab has integration with MPLABX/Arduino IDE for programming the microcontroller's boards. As the purpose of PICSimLab is to emulate real hardware it does not have any source code editing support. For code editing and debugging the same tools used for a real board should be used with PICSimLab, such as MPLABX, Arduino IDE, or VSCode with PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield w5500 for internet connection or the color graphic display ili9340 with touchscreen. ...

Digital Signal Processing Block Diagram Compiler - user extendable to all DSP's, but presently supports only the TI C2000 family. Rich support for fixed point arithmetic, both saturated and unsaturated. Block diagram entry is via TinyCAD (included).

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

asfpga is an assembler written for use in FPGA design. It can be easily modified for your instruction set. The ultimate goal of this software is to allow a FPGA designer to easily write assembly code for a custom instruction set. The current version al