Search Results for "serial"

Design of a billboard panel based on Microchip’s microcontroller PIC16F877A, with the following features: 1) Animation: Scrolling messages in vertical and horizontal direction 2) Storage: In EEPROM up to 10 texts of up to 78 caracters. 3) Recording of messages: Via PC serial port. 4) Characters: Size 8x12. 5) RTC: Programmable calendar.

DSAquire allows you to download and plot trace data from a Thurlby DSA524 digital storage adaptor (it's a 25 year old instrument, but better late than never, eh?). The data is downloaded via an RS232 serial link using a null modem cable. You can export the plot as an image or export the data in real-world units as a csv file. This software runs under Linux and also under Windows XP and later using Cygwin. Pre-compiled binaries are supplied, as are full sources under the GPL. The interface of provided via FLTK. Also hosted here are the service and operators' manuals for this instrument, as well as dumps of the firmware from the EPROM. ...

Application was designed to provide user a capability to visualize ADC measurements flow on PC monitor and to save data on a hard disk. At a present moment application uses serial port connection for data capturing. That is why at first you should provide all hardware drivers and other resources for ADC that allow to communicate with PC.

This library, then DLL, designed for use with weighing terminal CI-5010A on the RS-422/485 or RS-232 via a physical or virtual COM port over USB in OS NT/2000/2003/XP/Vista/7/8 and reads and decodes the data of the operation, gross weight, net weight, unit number, value and sign weight, units and features indicators. Restoring communications using virtual serial port automatically. ORDER use and limitations: 1. You can optionally set the COM port in the procedure 'reinit()' with constantly raised the flag of activation in the library is being processed. 2. Parameter gl_count procedure 'getdata' indicates the number of received packets of COM-port. 3. Implemented AutoTrack pulling converter RS-485/USB (via SetupAPI) and reconnect to the specified port initialization.

Virtual instrumentation software, currently designed for modifying automobile engines. Intended as a modular framework to communicate with devices on an IO port (serial, parallel etc.) and allow a visual representation of the instrument.

COM Studio utility helps to develop and test a serial communication protocol for embedded application like USART or RS232. COM studio is a cross platform application developed on top of QSerial device using the QT library. With COM studio is possible to create a set of command frames to be sent to the COM port and decode the answers coming from the device. The serial protocol can be fully customized with a graphical user interface.

This software is to be used as a communication interface for photographic densitometers to receive transmission or reflective density through the serial port RS-232. A graph of the received data is also done automatically.

Recon allows monitoring and recording of data stream trough serial port.

ADCViewer visualizes analog signals coming from a microcontroller board through the serial port.

GClima receive data from serial port, analyze and show the information collected from a Weather Central. All the data is saved in a xml file, and graphics exported to JPEG. The GClima means GTK Clima (and "clima" in spanish means climate).

A program to capture ALDL diagnostic data from DSM cars (Mitsubi Eclipse, Eagle Talon, Plymouth Laser, and Mitsubishi Galant VR-4) and log the information for later analysis.

A dialect-neutral Smalltalk library which supports communication with NMEA enabled devices, such as GPS receivers. The initial specific target device will be a Magellan GPS315 receiver.