Search Results for "linux on windows" - Page 3
Sort By:
Showing 100 open source projects for "linux on windows"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Advanced Simulation Library
Free multiphysics simulation software package
Advanced Simulation Library (ASL) is a free and open source multiphysics simulation software package. Its computational engine is based, among others, on the Lattice Boltzmann Methods (http://en.wikipedia.org/wiki/Lattice_Boltzmann_methods) and is written in OpenCL (http://en.wikipedia.org/wiki/OpenCL) which enable extraordinarily efficient deployment (http://asl.org.il/benchmarks) on a variety of massively parallel architectures, ranging from inexpensive FPGAs, DSPs and GPUs up to... -
2
Explicit/Impicit Finite Element Program with linear/nonlinear, elastic/hyperelastic/hypoelastic/plastic/visco, contact,thermal, fluid capabilities. h/p refinements. Parallel/Distributed solvers available. No shell elements but has 2D beams, trusses.
-
3
Libre Mechanics
Open Knowledge on engineering development.
Libre Mechanics it’s an Open Knowledge project created to offer a useful platform of information related with the development and research of Mechanical Engineering themes and similar fields, higly related with the use of Open Source and Software Libre tools. Here you will find a wide variety of projects, publications and scientific material available as references for developing their own projects, also guides and tutorials that allow you to take advantage of free software tools available... -
4
wirecutter plugin for inkscape
This plugin exports G-Code for a wirecutter
The "wirecutter" plugin for inkscape is a plugin to generate g-Code for a 2D wirecutter with a turning table. You can either draw one open path which is the path which the machine will cut or you can draw some closed paths. These closed paths (e.g. Letters) must be connected because the cutter cannot leave the raw material like a milling machine. The Plugin helps you to create these connectors. If you have a wirecutter with a turning table you can create multiple "cuts" for... -
Fully Managed MySQL, PostgreSQL, and SQL ServerCloud SQL handles your database ops end to end, so you can focus on your app.
-
5
Buildes
A designer’s program for describing parts of the building
Buildes is an integrated development environment that assists the user in creating building information. It reads a text (session) file from which it compiles the information. It then allows the user to browse, analyze and export the resulting building knowledge. The compilation system is written in pure Python. The building components created are rendered in PythonOCC. The GUI is written using PyQt. -
6
finFoil is an application to help amateur surfboard fin makers foil their fins properly. All downloads are moved to https://finfoil.io Check out the homepage for the latest news and tutorials: https://finfoil.io hrobeers
-
7
baramonweb
OpenFOAM UI based on web
baramonweb은 php로 구현된 웹어플리케이션으로 웹 기반의 OpenFOAM 사용자환경입니다. OpenFOAM 입력 파일 생성, 솔버 및 유틸리티 구동을 지원합니다. -
8
CamelCAM
3D CAM program for CNC mills/lathes
CamelCAM will allow the user (in time, when/if fully functional) to load CAD 3D geometry objects from DXF, IGES and possibly other file formats, choose a particular CNC machine model, set needed parameters and then generate an ISO program suited for that CNC machine, capable of milling/lathing the selected piece. -
9
GeoPDEs
A package for Isogeometric Analysis in Octave and Matlab
GeoPDEs is a suite of software tools for research on Isogeometric Analysis of PDEs. GeoPDEs is free software implemented in Octave and fully compatible with Matlab. GeoPDEs is no longer developed at SF, and has moved to GitHub. Please visit http://rafavzqz.github.io/geopdes/ The mailing list will remain active. Releases up to 2.0.4 can be found here. From version 2.1.0 onward, see https://github.com/rafavzqz/geopdes -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
Voxel CAD. Open source voxel editing and analyzing software. Edit and create multi-material voxel objects. Simulate the dynamics in a quantitative physics sandbox to test engineering designs or make moving creatures. www.voxcad.com for videos.
-
11
ArchNURBS
NURBS-based elastic and limit analysis of masonry arches in MATLAB
ArchNURBS is a MATLAB tool for the analysis of planar curved structures, with a particular attention to masonry arches. As in CAD softwares, the geometry of the model is defined by a NURBS representation of the structure. Indeed, the user can upload geometries imported from a CAD environment. Based on such a representation, ArchNURBS performs the elastic isogeometric finite element analysis and the collapse limit analysis of the structure. It is possible to include in the analysis the... -
12
The 1-dimensional gas-dynamics code. More information in http://www.openwam.com Modeling is an important technique for the optimization of internal combustion engines (ICE). The use of calculation models together with experimental tests is producing unquestionable successes due to the fact that both techniques complement each other. 1D wave action models simplify the engine by means of ducts, where only one dimension is considered, and volumes where mass accumulation is considered and...
-
13
EuroNCAP Points Calculator
EuroNCAP Grid Point Calculator
Euro NCAP Calculator is a GUI based tool, developed in Qt-Open source, to calculate EuroNCAP point performance using test or CAE Simulation results in csv format. Using this tool, NCAP performace for every loadcases can be calculated using X simple steps. This tool can currently takes care of Euro NCAP 7.0 protocol fully and partially the Euro NCAP 5.0 protocol. -
14
SAMoCAD
Simple CAD program
SAMoCAD - its program to create simple drawings, partially supports DXF. Main features: - create simple objects (line, arc, circle) - create complex objects (text, dimensions) - edit drawn objects - save drawing to SVG format - output drawing in PostScript format - export/import content DXF files (primitives LINE, CIRCLE, ARC, TEXT, DIMENSION) Program written in Python 2 and use the library Tkinter. Program requires no installation, but you need install Python 2.7 or later on... -
15
Library for creating and analyzing voxel objects. This project has moved to github. https://github.com/jonhiller/Voxelyze
-
16
The BladeDesigner package is a CAD/CAE tool providing classes for turbomachine blade design. So far it is optimized to be useful in the aerodynamic design process. It comes with a GUI but is most powerful with user defined python scripts.
-
17
Impact is an explicit Finite Element Program Suite which simulates dynamic impact events. It has a range of elements, contact handling and different material laws. Models can be created, solved and analyzed with the included pre- and postprocessor. Impact is based on an Explicit Time stepping algorithm. These kind of codes are used to simulate dynamic phenomena such as car crashes and similar, usually involving large deformations.
-
18
A modified version of XFLR5 (http://www.xflr5.com/xflr5.htm/) that focuses on analyzing a folder of airfoils to find the best airfoil for a given Re distribution Currently this project is very task-specific and may require a large amount of work to adapt it to other uses. It still has lots of bugs is definitely in its infancy. However, updates are planned for the future. Current Bugs of note: - The program doesn't currently close correctly. To close it you must use the task manager...
-
19
Application File Bucket
Small application to open multiple file with a pre-processor
This application is to open multiple files in one pre-processor using a single click. -
20
Animator Toolbar Manager
Application to manage userdefined animator toolbars
This program can read the Animator XML files and allow for an easy modification of the animator user toolbars -
21
Animator Session Wrapper
Easy animator session file manipulation
Session wrapper is a tool which makes using animator session file easier. This allows a reusable session file to be run multiple time and also allow easy selection of the variable values. This tool is still in development phase and still a lot of updates are to come with upcoming versions. -
22
JS-CAD
Free, Browser-Based HTML5 CAD App
NOTE: I moved the source to Github. The name is the same. JS-CAD is meant to be a small, lightweight CAD application that will run in any HTML5 compliant browser. Give the latest version a try: http://js-cad.sourceforge.net/latest/index.html -
23
FEDES
A finite element data exchange system
FEDES is a Finite Element Data Exchange System for mapping finite element analysis data between different FE solvers and meshes with different element types and densities. Six commercial FE solvers are supported (ABAQUS, ANSYS, DEFORM, MARC, MORFEO, VULCAN). The FEA data outputted can be visualized with the open source program ParaView. -
24
Nadstavba ST
Stavařská nadstavba pro AutoCAD a IntelliCAD.
ST je stavařská nadstavba pro AutoCAD a IntelliCAD napsaná v AutoLISPu. První řádky byly napsány někdy v říjnu 1999. Z počátku měl celý projekt sloužit jen k připomenutí a zdokonalení se v AutoLISPu. Časem ale vzniklo dost funkcí, které pokud by se poskládaly dohromady, byl by z toho celkem užitečný celek. První použitelné verze byly k dispozici v létě 2000. Spolehlivě fungovaly ale jen pod A2000. Skutečně spolehlivá verze byla až verze 1.40, o té se i přes všechny nedostatky dalo říci, že... -
25
StyroFoamRobot
Cuts 3D objects from polystyrene foam (EPS/XPS)
A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.
