Search Results for "linux i2c"

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. ...

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into...

A CW beacon implemented in C language on a AVR AtTiny13A microcontroller (1KB flash!). Include a CW parametric modulator/keyer, an emulated I2C periferal and a device driver in order to handle the Si570 oscillator by Silabs. You can personalize the transmitted message and the morse speed (in WPM). In the example the beacon is IQ6MC/B JN63RH @ 144.450MHz. Enjoy this example and if you will appreciate it, please sens me a feedback! IW6DFW, Maurizio