Search Results for "file="

...For each reference point, travel CNC with a laser module and fine tune X/Y coordinates to target at the center of a drilled point (laser light will dim out). Write each of the measured point's coordinate with corresponding ideal (original) point coordinate into the reference point (text) file. Then use this utility with source G-Code file & measured reference file to perform transformation into a destination G-Code file. Each X/Y coordinate in "G0", "G00", "G01" commands will be rotated by a calculated angle.

...Some EdytorNC features : bolt holes calculation; solutions of triangles calculation; speed, feed calculation; conversion inch/mm, mm/inch; code colouring; RS232 data transmission with automatic file saving and possibility to download new CNC program directly from machine (beta function, look in tool tips in serial port configuration dialog). Clipboard to keep texts from system clipboard.

CamelCAM will allow the user (in time, when/if fully functional) to load CAD 3D geometry objects from DXF, IGES and possibly other file formats, choose a particular CNC machine model, set needed parameters and then generate an ISO program suited for that CNC machine, capable of milling/lathing the selected piece.

PCIToGCode is a software developed to convert an image of a printed circuit board (PCB) in to a G code file. Using the G code file, you can mill a PCB using a CNC milling machine. This software was developed to help and to speed up the manufacturing process of a PCB prototype. Using this software, you will be able to build your so expected project, extracted both from a magazine or from the Internet, which needs a PCB to be produced, without any complicated CAD software. ...

Arduino firmware and Java GUI for the Hydra Multi-headed Manufacturing Machine (Hydra-MMM). The Hydra is a cartesian positioning system that has multiple, independent toolhead mounts for a wide variety of attachments. See: cpwebste.blogspot.com

This Python 3.1 tool manipulates the coordinate system of CNC GCODE for machining or engraving. It can Flip X, Y, or Z coordinates, mirror X, Y, or Z coordinates, flip or Mirror both XY coordinates, or insert Z motions into a GCODE file devoid of them.

Now you can translate your vectorial and bitmap design data to your CNC machines! OpenCAM provides an interface where you can configure your CNC equipment and then export the file followiing it's commands! You can export PS,PDF,AI,EPS,DXF,SVG and Bitmap

FTP BNC. File Transfer Protocol Bouncer. Allows Any one to setup a Bouncer to a ftp server. Uses, mask the real identity of a ftp server, provide link over lans running NAT or etc. Proxy and FXP modes. Commands, or commands and data in proxy, data in FXP

Project aim is to translate RS274X files such that it is easy to use the RS274X file content to automaticly program a home made CNC milling machine to mill Printed circuit boards.

SNCManager is NC file manager.(for CNC Machining.) Only use GPL(www.gnu.org).