Search Results for "computer hardware simulator"

Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically.

A tool for CNC toolpath generation. Model data in, G-Codes out. The system is kept as generic as possible. Machines with up to 9 axis can be defined. Machine simulator included.

A HID interface component for LinuxCNC/EMC. HID is USB speak for Human Interface Device, that is, input/output USB devices such as joysticks, gamepads, CNC pendants. This component was built to support devices that weren't handled by stock LinuxCNC/EMC components.

Universal CNC for COM port. It's software to control CNC using arduino board(RC servo+Encoders). It has build in CAM software.

The Rise and Shine LED clock has been designed to educate and encourage hacking and modifying of both software and hardware. This is a analogue style digital clock with multiple display states, a 24 hour alarm, a count down alarm, multiple alarm display states and a demo mode. One of the alarm states is a dawn simulating alarm, where the lights gradually come on over 20 minutes, enducing a natural waking sleeping pattern, with out the shock of a abrupt noisy alarm sound. Hence the name...

LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.

qnutCNC is set out to control an ethernut development board which is running ucos2 and which in turn controls a CNC machine.

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

4.4BSD-based UNIX-like operating system for CNC / machine control applications. Using low-cost hardware, FabBSD can be used to control a wide array of CNC milling machines, lathes, routers, process-control and automation equipment.