Search Results for "usdt flash program"

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

NodeMCU is an open source Lua-based firmware for the ESP8266 WiFi SOC from Espressif and uses an on-module flash-based SPIFFS file system. NodeMCU is implemented in C and is layered on the Espressif NON-OS SDK. The firmware was initially developed as a companion project to the popular ESP8266-based NodeMCU development modules, but the project is now community-supported, and the firmware can now be run on any ESP module.

stlink is an open source toolset to program and debug STM32 devices and boards manufactured by STMicroelectronics. It supports several so-called STLINK programmer boards (and clones thereof) which use a microcontroller chip to translate commands from USB to JTAG/SWD. There are four generations available on the market which are all supported by this toolset.

rEFInd is a fork of the rEFIt boot manager. Like rEFIt, rEFInd can auto-detect your installed EFI boot loaders and it presents a pretty GUI menu of boot options. rEFInd goes beyond rEFIt in that rEFInd better handles systems with many boot loaders, gives better control over the boot loader search process, and provides the ability for users to define their own boot loader entries.

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

PNotes is light-weight, flexible, skinnable manager of virtual notes on your desktop. It supports multiple languages, individual note's settings, transparency and scheduling. Absolutely portable as well - no traces in registry. PNotes.NET edition requires .NET framework 4 Client Profile

News flash: I've setup a github repository for future development/etc. https://github.com/hvisage/metalog/releases Metalog is a modern replacement for syslogd and klogd. The logged messages can be dispatched according to their facility, urgency, program name and/or Perl-compatible regular expressions. Log files can be automatically and safely rotated.

Advanced Onion Router is a portable client for the OR network and is intended to be an improved alternative for Tor+Vidalia+Privoxy bundle for Windows users. Some of the improvements include UNICODE paths, support for HTTP and HTTPS proxy protocols on the same Socks4/Socks5 port with HTTP header filtering that generates fake identity-dependent headers every time the identity is changed (proxy chains are also supported), support for NTLM proxies, a User Interface that makes Tor's options and...

SUSFinder is a utility to assign IP address and flash firmware to ASUS WL-500G Premium router booted in recovery mode on local network, in the case that you didn't know router's IP address settings beforehand. This utility do essentially the same thing as ASUS Firmware Restoration Utility, except that it relies on the external 'atftp' program to do the TFTP firmware flashing part.

FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices.

It is a software to program ISP based 8051 controllers(89SXX) on Linux. The software decodes the hex file entered from the command line and send it to controller's flash memory using PC's parallel port.The hardware connections are very minimal.

prog89S52 is a utility for Linux on the PC, allowing programming of Atmel's AT89S52 microcontroller via the parallel printer port. Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. ...

This program takes audio input from microphone, you can redirect pc audio output using control panel on Windows or pavucontrol on Linux. Your computer needs to support openCL (is sufficient a modern gpu or a intel core cpu) Commands: F11 toggle fullscreen S toggle stroboscopic flash NUMBER [0 to 9] change number of symmetry axes

During the period from 1990 through 2002, EPRI funded the development of a Lightning Protection Design Workstation (LPDW), which was used by many utilities to assess the lightning performance of distribution lines. Since about 2002, this program has not been available. EPRI decided to release the simulation kernel of LPDW under an open-source license (GPL v3), so it may be incorporated into IEEE Flash and other projects. OpenETran can presently simulate multi-conductor power lines, insulators, surge arresters, non-linear grounds, and lightning strokes. It efficiently calculates energy and charge duty on surge arresters, and iterates to find the critical lightning current causing flashover on one or more phases. ...

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

mn455 is CLI program to maintain short notes under linux console. there are simple tag-system, search and filter. you can use your favorite editor to create and edit notes.

Program was created for purpose to edit metadata, which are placed in flv filetype's (flash video file), where can be saved any information about file. You can insert new data, erase old and view existing.

GuoZi is a Gnome based Chinese vocabulary management and flash card program.

Flashcard program for Palm Pilot handhelds. Java PC desktop program to edit flash cards and import SuperMemo databases included. Many font types supported including Japanese. Image support also present. Visit home page for sample cards.

A flash card program with a twist, that uses a neural network to optimally schedule your reviews.

A "flash card"-like vocabulary learning program with a comfortable handling of several translations and score management.

Program GameBoy Advance cartridges with the Flash Advance Linker using your Amiga!

In-System-Programmer for ATMEL AT89S8252 Microcontroller. This program for the LINUX platform is able to read and write the Flash and EEPROM Memories of an ATMEL AT89S8252 microcontroller connected to the parallel port of a PC.

Upgrdsysd streamlines the upgrading of programs and kernels on resource constrained compact-flash based embedded linux systems. It is basically a tiny TFTP server combined with a method to invoke a user-defined authentication/validation script or program.

This program is a simulator/debugger for Atmel AVR flash microcontrollers, built with Motif (incompatible with Less Tiff). It has language independent interface. This version can almost fully simulates AT90S and ATmega series.