Search Results for "serial port tester"
Sort By:
Showing 98 open source projects for "serial port tester"
View related business solutions-
Our Free Plans just got better! | Auth0 by OktaYou asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your secuirty. Auth0 now, thank yourself later.
-
Free CRM Software With Something for EveryoneThink CRM software is just about contact management? Think again. HubSpot CRM has free tools for everyone on your team, and it’s 100% free. Here’s how our free CRM solution makes your job easier.
-
1
This project provides a proxy that allows telnet/tcp connections to be made to serial ports on a machine.
-
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
3
xxHash
Extremely fast non-cryptographic hash algorithm
xxHash is an extremely fast non-cryptographic hash algorithm, working at RAM speed limit. It is proposed in four flavors (XXH32, XXH64, XXH3_64bits and XXH3_128bits). The latest variant, XXH3, offers improved performance across the board, especially on small data. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical across all platforms (little / big endian).... -
4
tio
A serial device I/O tool
tio is a serial device tool that features a straightforward command line and configuration file interface to easily connect to serial TTY devices for basic I/O operations. To make a simpler serial device tool for working with serial TTY devices with less focus on classic terminal/modem features and more focus on the needs of embedded developers and hackers. tio was originally created as an alternative to screen for connecting to serial devices when used in combination with tmux. -
Shift, the browser that merges all of your web apps into one powerful window.Streamline everything you do online when you install Shift and access thousands of apps without leaving your browser. Connect all of your Gmail, Outlook, and Office 365 accounts and manage everything from one centralized window. Build out your Shift browser with apps that integrate seamlessly so you have ultra-fast access to all the tools you use to stream, shop, work, browse, and stay connected. Shift brings it all together.
-
5
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
-
6
Linux null-modem emulator
tty0tty is a kernel-module virtual serial port driver for Linux.
The Linux null-modem emulator (tty0tty) is a kernel-module virtual serial port driver for Linux. This create virtual tty ports pairs and use any pair to connect one tty serial port based application to another. There are a version using pseudo-terminal (UNIX 98 style). -
7
Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li
-
8
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me... -
9
cwdaemon
morse daemon for the serial or parallel port
This project is no longer actively developed on SourceForge. Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released... -
Payroll Services for Small Businesses | QuickBooksEasily pay your team and access powerful tools, employee benefits, and supportive experts with the #1 online payroll service provider. Manage payroll and access HR and employee services in one place. Pay your team automatically once your payroll setup is complete. We'll calculate, file, and pay your payroll taxes automatically.
-
10
spectranfid
A Spectranet networking FID driver for CP/M Plus
CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device brings networking abilities to the Spectrum computers. This driver allows connection to a remote disk image registered as N: and a remote character device (e.g. serial console) registered as SPCNET: (namely, one can type `DEVICE aux:=spcnet` to redirect AUX: to SPCNET: and use it as a serial port over ethernet). Proven to work on the real thing... -
11
ATTinyCore Universal
Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8
Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been... -
12
cooling home automation with Arduino(C) and Raspberry(front-end, python). Arduino features: - control PC 4-pin fan with PWM; - measure temperature/humidity with DHT11/22; - adjust fan RPM depend on temperature; - console management; - MQTT serial output. front-end features: - data collection form serial port with MQTT - webUI with for sensors parameters
-
13
pwc-lxled
PWC driver modded for Long Exposure and Led control support
This driver is derived from the PWC driver found in the Linux kernel. It adds V4L2 controls (`V4L2_CID_FLASH_STROBE/STROBE_STOP`) to drive the led present on some cameras. It also synchronously sets the video mode when power_save is off. This driver may be used to control long exposure modded webcams (SPC900, TouCam,..) when the led is used to trigger long exposure (this avoids the use of an additional serial port). -
14
ocapi
C-level driver collection for MSP430 and derivatives
ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used... -
15
xplgraph-cpmgsx-dxforth
An replacement of DXForth's xplgraph.scr library for CP/M
... (with all of its cryptic syntax) and uses CP/M's GSX interface. Using this interface enables graphical output to either local screen or remote devices connected through a serial port (like Tektronix 4010 text-and-graphics terminal emulator running on PC). Limitations: - No colors, no shades of gray. Color 0 is blank, others are mapped to solid pixels. - No READPIX function. - PALETTE, SETPAL and SOUNDX are dummy. -
16
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
17
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
18
sercd is an RFC 2217-compliant serial port redirector. It lets you share a serial port through a network. It is based on sredird. The RFC2217 protocol is an extension to telnet and allows changing communication port parameters.
-
19
ESP8266_Flespi_yum
ESP8266 (ESP-01) + Serial Commands + Flespi Broker
ESP-01, the simplest USD 1.50.- ESP8266 gets a firmware that allows the user to control it by serial port. Therefore it can be used along with any terminal, computer or microcontroller, which is equipped with a serial port (or USB port) -) Connect / disconnect to WiFi and Flespi MQTT broker -) Publish messages -) Subscribe to topics / Unsubscribe from topics -) Read the messages received Furthermore a GUI is on developing process to demonstrate the use. Paypal donations... -
20
ttylog - a serial port logger
Serial port logger which can be used to print to stdout.
The program ttylog is a serial port logger which can be used to print everything that comes in to a serial device to stdout. The device and the baud rate can be specified on the command line and a timeout can be set instead of just killing the process in order to stop it. You can also elect to have the output being sent to standard out to be time stamped. -
21
Fiwix
A UNIX-like kernel for the i386 architecture
FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file... -
22
-
23
-
24
SerialPortMon
Simple serial port terminal with packet delimiter time detection
A small, simple terminal program capable of detecting packet delimiting silent period. This is just something for refresh on Win32 programming for me, and will be part of a bigger project in the future. -
25
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...