Search Results for "nano c"
Sort By:
Showing 32 open source projects for "nano c"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
Termux:X11
Termux X11 add-on application
Termux is an Android terminal emulator and Linux environment app that works directly with no rooting or setup required. A minimal base system is installed automatically - additional packages are available using the APT package manager. Termux combines standard packages with accurate terminal emulation in a beautiful open-source solution. Access API endpoints with curl and use rsync to store backups of your contact list on a remote server. -
2
Magnetic-Valet
The Magnetic-Valet is a tool to measure and vizualize magnetic fields.
The Magnet-Valet contains a STMicroelectronics STM-32 NUCLEO-L432KC board attached to an Arduino nano expander board (V1.0) connected to a LCD Gfx-240x128 display of the Smart-LCD project of the same author. -
3
Project: Olympus
An Arduino-based Altitude and IMU Payload for Model Rocketry
Project: Olympus is an engineering project that utilizes an Arduino Nano microcontroller to create an electronic payload that records altitude, g-forces experienced by the rocket, as well as roll rate. Included with the code is a 132 page Project Manual that takes you through the design and construction of the electronic payload. It also includes sections on the construction of the Estes Olympus rocket. A detailed code review of each section of code is included. We take a detailed look... -
4
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
5
HarduIno
Hardware-optimized Arduino library
This project is a partial overhaul of the Arduino hardware library, i.e. the main source files that make the core library. The intent is to reduce the overhead introduced by the initial library and eliminate the numerous function calls whenever direct register access is possible. -
6
Arduino Launch Control System (LCS)
A single rod model rocket launch control system using the Arduino Nano
This is a single rod model rocket launch control system. The system utilizes the Arduino Uno/Nano to report on local weather conditions (temperature, humidity, barometric pressure). The system also provides a 10-second countdown when the fire button is pressed. The system meets and exceeds the NAR Safety Code standard for model rocket launch systems as it incorporates a removable key to block the flow of power to the launch pad. It incorporates an additional two-button safety system to... -
7
Project: Icarus
A model rocketry project studying temperatures inside the body tube
Project: Icarus is a proof of concept model rocketry research project that brings several individual projects together into a single model rocketry research launch vehicle. This specific project includes an avionics payload, temperature sensors along the body, and a video camera. The sensors record the heat buildup inside the body tube as the solid rocket motor burns and fires the ejection charge. The sensors are placed in three different locations along the body tube to provide data on the... -
8
Arduino Primary Avionics Module (A-PAM)
A foundational avionics system for model rockets
If you do a search for model rocket electronic payload, you will see a lot of entries for medium to high power, large diameter rockets. These types of rockets are large, typically 80mm (3.1 inches) in diameter or larger. These rockets are flown in large open areas, often deserts and dry lake beds. These larger rockets also use larger propellants, typically in the High Power Rocketry (HPR) range of “H” and above impulse level. Not only do these motors require you to be certified in HPR, the... -
9
ECG Logger
ECG Logger is a complete Holter system incl. device and firmware.
NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation... -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
10
C-GM Counter
Connected GM Counter device (IoT) for radioactivity measure
The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other boot crashes. -
11
Arduino Smart Control allows you to communicate with your Arduino Nano through the Serial. It is possible to switch from one to 4 LEDs (monostable and bistable mode). The bistable mode has a time set to 1 second by default. In addition to switching the LEDs, you can monitor various sensors such as temperature, humidity, water sensor and brightness sensor. You can save, read and delete the memory with the data acquired or sent to the device.
-
12
Ham Radio Projects
KB1OIQ Ham Radio Projects
This area contains files from a variety of ham radio related projects including: * Software and hardware mods for the BITX40 QRP SSB transceiver from India, including primitive voice synthesis from the Arduino Talkie library. * Software and hardware mods for the uBITX QRP SSB/CW transceiver from India, including voice synthesis using the EMIC-2 chip. * Hardware and software project to create an 80m ARDF transmitter using an Arduino and a Cricket 80a * My Arduino sketches for the... -
13
Thread
Mulithreading Arduno library
Simplest of possible kernel for iterative time division multithreading on smallest AVR boards Arduino. This is a small and adapted part of the future "Like OS". -
14
Under this name are enclosed a number of applications useful to study the scattering of waves by (nano)particles of different shapes.
-
15
USB Rubber Ducky
A human interface device programmable
The USB Rubber Ducky is a Human Interface Device programmable with a simple scripting language allowing penetration testers to quickly and easily craft and deploy security auditing payloads that mimic human keyboard input. The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. With a... -
16
nilRTOSsensorcontrol
Arduino NilRTOS Sensor Control
Experiments in NilRTOS. Using an Arduino Nano, Mega2560, and Uno R3. Most of the work is being done on a Nano 328p. The goal is to have NilRTOS reading sensors, and activating certain things depending on the sensor value. The current goal is to move a servo depending on the value of a photoresistor. -
17
Navigation Shortest Map Dhaval Kadia
Shortest Path Navigator with Directions and Distance
Programmed on Language C. A nano-Infant of GOOGLE-MAP Optimized to Consume some MB instead of 50 GB of RAM This was Programmed Quarter Year ago in 2014 -
18
hbgm
'Hierarchical Bond Graph Modelling of Biochemical Networks'
Scripts and supplementary data for the manuscript 'Hierarchical Bond Graph Modelling of Biochemical Networks': Peter J. Gawthrop(1), Joseph Cursons(1,2), and Edmund J. Crampin(1-4). (1) Systems Biology Laboratory, Melbourne School of Engineering, University of Melbourne, Victoria 3010, Australia. (2) ARC Centre of Excellence in Convergent Bio-Nano Science, Melbourne School of Engineering, University of Melbourne, Victoria 3010, Australia. (3) Department of Mathematics and Statistics,... -
19
nano VM - a small virtual machine with compiler and assembler. features: file I/O, TCP/IP sockets, GUI & sound server, JIT-compiler (x86). platforms: Amiga 68k, AROS, Linux, Windows, Android
-
20
Gamma Grapher Nano
Gamma Spectrometry using DSO 201 Nano hardware
This software to turn a DSO Nano 201 into a Multi-Channel Analyzer for gamma spectrometry. Software is open source. Support and discussion are through the GammaSpectrometry group at http://tech.groups.yahoo.com/group/GammaSpectrometry/ -
21
tui is a user interface for mobile phones with keypads. It runs on text console or under nano-X, and communicates with modem part with AT commands. It runs well on Siemens SX1 running linux, and allows you to call from it and answer calls.
-
22
Azul OS
Azul OS version dev(Linux) IA
...Windows & linux. En cours .. # Azul voice version windows Azul interface . Disponible # Azul dev rev 0.4.1 . Disponible [changelog] software added : php5-mysql gcc-c++ php5-gd php5-ctype perl-HTML-Tagset php5-zip php5-curl kernel-source mysql-connector-java php5-pear php5-mcrypt php5-ftp devel_C_C++ gimp gedit recode libreoffice MozillaFirefox wireshark audacity nano This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. #Blog : http://azul0.wordpress.com/ -
23
NanoHive is a modular simulator used for modelling the physical world at a nanometer scale. The intended purpose of the simulator is to act as a tool for the study and development of nanotech entities. The project will also focus on the simulation of complex biological applications such as Targeted Drug Delivery by simulating nanowires, magnetic nanoparticles and others. Updates will follow from January 2017.
-
24
FixeEngine
A 3D rendering / entity engine
This engine is not an attemp to re-inventing the wheel. It is a more learning-oriented project than something intended to provide a wide set of features. The approach to the OpenGL in this engine is something very experimental born from my own thoughts and can be usefull in future. If you want to help for your portfolio just ask: the TODO list is very long :) -
25
