Search Results for "dc motor controller"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more...

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller...

... a DC motor controlled by an h-bridge and an optical quadrature encoder for feedback. It uses timers, counters, and interrupts to generate PWM to control the speed of the motor, encoder pulse counting, and control loop updates.

This project provides an AVR-based, USB accessible, single-axis motion controller that can fit into an USB-connector completely and therefore is probably the worlds smallest stepper motor controller. Here both, hardware schematics and all software components are provided.

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

Graphical interactive windows application and library written in .Net/C# for simulating and controlling robots. Including firmware for ATmega8 to be controlled by the C# library and circuits for the ATmega8 controller board and L298-based motor board

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

A Linux driver and EPICS IOC for the Pro-Dex OMS MAXp. The MAXp is a 8 axis stepper/servo motor controller in PCI card form factor.

piCNC is a PIC based stepper motor controller for use in CNC applications. Its software and hardware development is completely open source and community supported.

GPL National Instruments 4-axis motor controller driver for PCI and PXI 73xx series (7334/7344,etc.) boards. Requires Linux Kernel 2.4 or 2.6 for proper operation.

Source code and diagrams for a dual focuser motor controller for a telescope. Includes source for an ASCOM driver that interfaces with the controller.

Stepper Motor Controller driver for Linux

This SourceForge project hosts the software component of the Open Source Motor Control project. The purpose of this project is to create an Open Source high-power H-bridge motor speed control system for DC permanent magnet motors.

.... The project will help you to connect any arduino motor shield or other H-Bridges to the controller because it is open source and the output pins can therefor be changed as you like. You can upload a better modified version and improove this article by contacting me. With some pin changes you can port this code to other arduino boards.