Search Results for "hardware monitor" - Page 2

A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.

This is a Linux driver for ThinkPad laptops, written by Borislav Deianov and Henrique de Moraes Holschuh. It aims to support various features of these laptops which are accessible through a ThinkPad-specific ACPI framework. The newest version is available in the latest version of the Linux kernel.

gbattray, a simple/lightweight client, displays the status the battery of a laptop in system tray. It can also be executed on non-graphical console by just returning current battery state on console.

GNU-MHome is a software and hardware project for instalation and administration of an intelligent house based in GNU-Monitor project.

Luvalley is a lightweight type-1 Virtual Machine Monitor (VMM) with novel architecture, to enable any OS to host virtual machines as pure applications by utilizing hardware virtualization extensions such as Intel VT and AMD-V.

hwnetmon is hardware network monitor. It will display RX/TX/Collisions via various hardware (parallel port, USB devices, etc).

zpmd for z/Linux running under z/VM on IBM mainframe is a z/VM Performance Monitor Daemon. It processes and gathers data from DCSS used by Monitor System Service (*MONITOR). Records are written to MySQL database.

Very simple DVB signal level indicator. No extra library dependency, only standard X library. Very small and simple C code. Tested with 2.6 series kernel, SkyStar2 DVB card and WindowMaker0.92 on Slackware 12. e-mail: maxcompress@yahoo.com

InsaMonitor is a monitor program that consists of multiple deamons and graphical clients showing real-time information of the monitoring deamons (CPU, memory, processes, optional : users, disk, alarms) over the network. Developpers : insa toulouse dgei 4

Netowrk Fidelity Utility, a "lights out" network service monitor.

monitor software for InSystemDebugging of programs running in an AVR target, using gdb/ddd, under linux, with a simple, low cost interface, which can be used for InSystem or standalone Programming as well.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

Supermon is a high-speed cluster monitoring system. Intended to monitor both OS and hardware health and status data of cluster nodes.

Linux driver for rtl8180 wlan card with philips, maxim or gct radio(other in future).Still under development!(Use at your own risk!).Managed and monitor mode working.Ad-hoc roughly working,WEP support with open authentication and promisc mode are ok also

"Source Hardware address Translation" provides an Ethernet to IP gateway. Ideally, any Ethernet network client can communicate through the gateway with the IP world on the other side regardless of what the client network stack is configured as. See the project website for how it works. The project has been dormant since 2006 but I would spend some efforts to round and hone edges if there is public interest.

This project is a combination of hardware and software used to monitor and control a hydroponic garden. Measures, logs, and charts: pH, EC, Temp, Res Depth, Light. Controls pumps, lamps, and fill/flush. It can contact the user via email or pager.

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

XenOS is an "operating system to run operating systems" - a virtualization monitor. It virtualizes system hardware, so any x86 operating system will work. Support for 64-bit hosts and guests is planned. This will be similar to VMware's ESX Server.

Controlling a server without keyboard, mouse and monitor. You'll need a free serial line and special hardware(< 5$). Platform: Linux.

ILM is a utility for the ISDN Line Monitor, an ISDN line monitoring hardware sold by many dealers in central europe. (e.g. Conrad and EgTel). It provides functions to: - retrieve all recorded information - erase all recorded information - config

A system health monitoring daemon based on lm_sensors.

Application Heartbeat Monitor is a daemon + library that applications register with to have their life signs monitored.

LM-Sensors Monitor is a monitor for gkrellm. It monitor your sensors using the lm-sensors' modules. You can monitor all your sensors and for temperature monitor you can choose °F or °C

Assembler and download/monitor for the new Rabbit 2000 (TM) microprocessor developed by Rabbit Semiconductor and Z-World. Allows use of Linux as host development platform.

The GDB (GNU debugger) RSP (remote serial protocol) allows remote debugging of embedded software. This project offers source code of monitors so the developer only needs to burn flash EPROMs once, then use serial communication to download/debug.