Search Results for "sensor motion"

SLAM in Autonomous Driving Book is the open-source code companion to the book SLAM in Autonomous Driving. It focuses on localization and mapping systems that combine LiDAR, IMU, GNSS, and vehicle motion data. The material begins with geometry, kinematics, Kalman filtering, inertial navigation, preintegration, and graph optimization. It then implements point-cloud processing, nearest-neighbor structures, ICP, NDT, scan matching, occupancy grids, and loop closure. Readers build both loosely...

DLIO is a new lightweight LiDAR-inertial odometry algorithm with a novel coarse-to-fine approach in constructing continuous-time trajectories for precise motion correction. It features several algorithmic improvements over its predecessor, DLO, and was presented at the IEEE International Conference on Robotics and Automation (ICRA) in London, UK in 2023.

XIVO is an open-source repository for visual-inertial odometry/mapping. It is a simplified version of Corvis [Jones et al.,Tsotsos et al.], designed for pedagogical purposes, and incorporates odometry (relative motion of the sensor platform), local mapping (pose relative to a reference frame of the oldest visible features), and global mapping (pose relative to a global frame, including loop-closure and global re-localization, this feature, present in Corvis, is not yet incorporated in XIVO). XIVO runs at 140FPS on stored data (here from a RealSense D435i sensor) or on live streams with a latency of around 1-7ms, depending on the hardware. ...

FUBI is a framework for full body interaction using a depth sensor such as the Microsoft Kinect with OpenNI/NiTE or the Kinect SDK. It further supports the Leap Motion Controller. FUBI is written in C++ and includes a C#-Wrapper. Releases are tested on Windows 8.1, but there also exist Linux Code::Blocks project files. Fubi's main functionality is gesture and posture recognition according to four gesture categories: 1.

LeapInto provides a simplified interface to the Leap Motion hand sensor input device. Multiple hand recognition is simplified to several stable categories and coordinates are normalised. The interface comes two flavours at present, an open broadcast system using the OSC protocol and a plugin for the Csound audio/music programming language.

Firmware, Receiver software and Hardware design for the Bowsense motion sensor interface. The received data stream can be converted to OSC packets, and distributed to OSC enabled realtime music applications.

KinectA is an application for motion tracking via Kinect Sensor – including hand, skeleton and object tracking. This software has been developed for the needs of media artists and designers. It provides a clearly arranged interface with multiple functionalities. The tracked information can be send via OSC to other hard- and software. KinectA is available for Mac and Windows.

This project is to build a motion emulator and a visualizer. The motion emulator produce "REAL MOTION SENSOR" data (from sampled data files.) Sensors include accelerometer, gyroscope, magnetometer, all with 3-axises with GPS and video clip.