Search Results for "ATmega"

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. ...

Simple Dumping Monitor Library (DumpMon) for Arduino-compatible ATmega microcontroller based boards allow to display either memory, registers and timer dumps and also interrupt vectors table dump. Beginning since version 0.6 functions of simple symbolic debugger are added. Being compiled the library requires about 11 KBytes of program memory (15 KBytes for Arduino MEGA). Requirements to RAM memory don't exceed 1 KByte (277 Bytes for dumpmon.pde example, 377 Bytes for dumpmonDebug.pde).

Arduino based aquarium light controller.

...The original tuner used an semidigital remote controller and 24line cable between the tuner unit and remote controller. I decided me to build the tuner unit and replaced the controller part by an ATmega MCU on both sides and linked them with cheap network cable. The used protocol between the controllers are RS422 based and is frame based with checksum. The tuner relays are switched each sepperate and the I/O unit are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. I decided me to use I2C-Bus Expanders instead using an ATmega 1284p and direct I/O handling in the expanding capability of this concept. ...

Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.

Kraken is an OS and a collection of drivers and circuits for an open hardware computer based in Atmel's ATMEGA microprocessor family.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

PLCduino is an open hardware alternative for industrial and home automation. It uses the well known ATmega chips as main processor, the same used on Arduino. This means that PLCduino is code-compatible with all arduino sketches.