Search Results for "system info software"

bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle...

https://sourceforge.net/p/contools/contools/ci/master/tree/README.md https://sourceforge.net/p/contools/contools/ci/master/tree/README_EN.txt https://sourceforge.net/p/contools/contools/ci/master/tree/README_EN.deps.txt https://sourceforge.net/p/contools/contools/ci/master/tree/changelog.txt

SimpleDCS is a Distributed Control System made easy - fully configurable both on hardware and a software level. Experimental stage (alpha)

Remote control of a Storkair/sehnder mechanical ventilation system (VMC) via a Raspberry Pi. This allow for the integration of the VMC in a domotica system (providing compatible domotica software)

Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. The WFS were mainly tested with FBDK (http://www.holobloc.com/). Wire Factory has been...

MGSyn (Model, Game, Synthesis) is an open-source tool which integrates game-based synthesis into model-driven development for industrial control and automation. It is served for research and educational purposes. MGSyn has been originally developed by Department of Informatics (Unit 6), TU München and fortiss GmbH and is now maintained by fortiss GmbH. The software is released under the GNU General Public License Version 3.0 (GPLv3). Please download the tutorial for step-by-step...

ACTIface (A Customizable TP-UART Interface) connects a PC to a KNX TP1 (EIB TP) network. It is built around a popular ASIC (the TP-UART) and optionally includes a microcontroller for improving communication with the PC (or standalone operation).