Search Results for "linux wireless"
Sort By:
309 projects for "linux wireless" with 1 filter applied:
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
Must Reading on ISAC
Must Reading Papers, Research Library, Open-Source Code
A design paradigm and corresponding enabling technologies, in which sensing and comms systems are integrated to efficiently utilize congested wireless/hardware resources, and even to pursue mutual benefits. Waveform Design and Signal Processing Aspects for Fusion of Wireless Communications and Radar Sensing. Supported by IEEE ComSoc ISAC Emerging Technology Initiative (ETI). Integrating Sensing and Communications for Ubiquitous IoT. Include reproducible codes, good papers and a research libary. -
2
FISSURE
The RF and reverse engineering framework for everyone
FISSURE is an open-source radio frequency analysis and signal intelligence framework built to support software-defined radio research, wireless security experimentation, and protocol reverse engineering. The project brings together tools for capturing, inspecting, decoding, replaying, and analyzing RF signals across a wide range of wireless technologies. It is designed as a practical environment for researchers and operators who need to move from raw spectrum observation to structured... -
3
geowifi
OSINT tool for locating WiFi networks using BSSID or SSID data
geowifi is an open source OSINT tool designed to search and retrieve geolocation information about WiFi networks using their BSSID or SSID identifiers. It queries several public WiFi geolocation databases and aggregates the results to help identify the approximate location of a wireless access point. By combining multiple data sources such as Wigle, Apple, Google, WifiDB, Mylnikov, and Combain, the tool can provide location data that may include coordinates and additional network metadata.... -
4
shadowsocks-libev
Bug-fix-only libev port of shadowsocks
Shadowsocks-libev is a lightweight secured SOCKS5 proxy for embedded devices and low-end boxes. Shadowsocks-libev is written in pure C and depends on libev. It's designed to be a lightweight implementation of shadowsocks protocol, in order to keep the resource usage as low as possible. Snap is the recommended way to install the latest binaries. You can build shadowsocks-libev and all its dependencies by script. The latest shadowsocks-libev has provided a redir mode. You can configure your... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
WPAGen
Wifi Password Generator
WPAGen is a wifi password generator written in Python. It runs in the terminal and has very few dependencies other than Python itself, and if you're using the compiled binary you don't even have to have Python installed. I digitally sign some files in my releases. If you'd like to verify those signatures, you can find my PGP/GPG keys at: https://marcusadams.me/keys.html If you'd like to donate there's several ways to do so: PayPal: https://paypal.me/gerowen Bitcoin (BTC):... -
6
WifiFred is an old buggy IRC bot written in PHP for use by Community Wireless groups. His functions including RF calculators (including fresnel, fsl, range estimation), hardware databases, internet utilities and standards databases and other fun tidbits. The code base has various security issues and was written back ~2004 - try not to hold it against the author! If anyone wants to work on the code base feel free - there is now a git repository setup.
-
7
EtherApe is a graphical network monitor modeled after etherman. Featuring Ethernet, IP, TCP, FDDI, Token Ring and wireless modes, it displays network activity graphically. Hosts and links change in size with traffic. Color coded protocols display.
-
8
Linpac
Amateur Radio AX.25 chat and PBBS program using Linux's AX.25 stack
A modular console-oriented amateur radio AX.25 keyboard to keyboard chat and PBBS program using Linux's AX.25 stack. Includes support for multiple concurrent connected sessions, a unconnected (UI) message screen, and an automated packet message client -
9
ADev
Lightweight Android development tool. Wraps Ant, 'android' and 'adb'.
...Use adb wireless debugging over Wi-Fi, no root required. Logcat: Color highlighting for warning and error messages with filter options to block unwanted tags. Option to show log output by Process Id. -
Enterprise-grade ITSM, for every businessFreshservice is an intuitive, AI-powered platform that helps IT, operations, and business teams deliver exceptional service without the usual complexity. Automate repetitive tasks, resolve issues faster, and provide seamless support across the organization. From managing incidents and assets to driving smarter decisions, Freshservice makes it easy to stay efficient and scale with confidence.
-
10
NodeMCU
Lua based interactive firmware for ESP8266, ESP8285 and ESP32
NodeMCU is an open source Lua-based firmware for the ESP8266 WiFi SOC from Espressif and uses an on-module flash-based SPIFFS file system. NodeMCU is implemented in C and is layered on the Espressif NON-OS SDK. The firmware was initially developed as a companion project to the popular ESP8266-based NodeMCU development modules, but the project is now community-supported, and the firmware can now be run on any ESP module. -
11
proex gpr control
Mala ProEx and Easy Locator GPR control software
Reverse engineered communication protocol for the Mala ProEx and Easy Locator GPR implemented as a CLI & GUI running on unix systems. The communication protocol was ported to a graphical user interface applicable to embedded systems through the use of the Qt toolkit (tested on Armadeus Systems APF27 board). The GUI includes GPS datalogging capability assuming a receiver providing NMEA sentences at 4800 bauds is connected to the host computer. Because the software requires access to the raw... -
12
Hacker Roadmap
A collection of hacking tools, resources and references
Hacker Roadmap is an archived learning repository that organizes tools, references, and concepts for practicing ethical hacking and penetration testing. It introduces basic security vocabulary, the difference between hacking and ethical hacking, and the general steps of a penetration test. The guide groups resources by categories such as information gathering, password attacks, wireless testing, exploitation tools, sniffing and spoofing, web hacking, post-exploitation, and frameworks. It... -
13
Paper-with-Code-of-Wireless-comm
Paper-with-Code-of-Wireless-communication-Based-on-DL
Paper-with-Code-of-Wireless-communication-Based-on-DL is a curated repository that collects research papers and corresponding code implementations related to the application of deep learning in wireless communication systems. The project aims to help researchers and graduate students quickly find reproducible implementations of algorithms used in modern communication research. Wireless communication research has increasingly adopted deep learning techniques to address complex tasks such as... -
14
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
15
Dummy-Robot
My super mini robotic arm robot project
Dummy-Robot is an open source robotics project by Peng Zhihui that showcases the design and implementation of a compact robotic arm . The repository contains full hardware design files, firmware, control software, and 3D models. It includes components such as a gripper, LED light ring PCB, wireless spatial positioning controller, and a portable case. The project demonstrates advanced engineering with stepper motor drivers, custom controllers, and debugging tools. While the original version... -
16
Pushloc
A wireless push-type network simulator.
A wireless push-type network simulator that considers locality of demand for performance improvement. The network environment consists of multiple directed emitters for parallel data broadcasting. Performance depends on the mean response time of clients. -
17
jNetPcap - A Libpcap Java Binding
A java PCAP and DPI library
A java wrapper for popular "libpcap" and "WinPcap" libraries. Accurate full API translation. Packet buffers delivered with no copies. Send custom packets, gather statistics. Comprehensive and easily extensible DPI engine. -
18
Hack-Tools
Hack tools
hack-tools is a collection of various hacking tools and utilities. It serves as a comprehensive toolkit for penetration testers and cybersecurity enthusiasts, encompassing a wide range of functionalities. -
19
WiFi-Pumpkin
WiFi-Pumpkin - Framework for Rogue Wi-Fi Access Point Attack
The WiFi-Pumpkin is a rogue AP framework to easily create these fake networks, all while forwarding legitimate traffic to and from the unsuspecting target. It comes stuffed with features, including rogue Wi-Fi access points, deauth attacks on client APs, a probe request and credentials monitor, transparent proxy, Windows update attack, phishing manager, ARP Poisoning, DNS Spoofing, Pumpkin-Proxy, and image capture on the fly. moreover, the WiFi-Pumpkin is a very complete framework for... -
20
SystemC Network Simulation Library (SCNSL) is an extension of SystemC to allow modelling packet-based networks such as wireless networks, ethernet, fieldbus, etc. As done by basic SystemC for signals on the bus, SCNSL provides primitives to model packet trasmission, reception, contention on the channel and wireless path loss. The use of SCNSL allows the easy and complete modelling of distributed applications of networked embedded systems such as wireless sensor networks, routers, and...
-
21
Clu-Linux-Live
Various Processing and Data Rescue Tools over Wired or Wireless Networ
This Linux Live CD provides Various Processing Command Line Utilities (Clu) and Data Rescue Tools which can be used on a Wired or Wireless Network. On Startup it prompts the user to change password, mount all filesystems available locally, start wireless network ( if wifi interface present ), start network services (samba/ssh/sftp) and present user with a console for executing various utilities i.e Text, Image, Audio, Video, Downloading etc. on their FileSystems that are mounted. ... -
22
MIMO OFDM
MATLAB implementation source code accompanying the book MIMO-OFDM
This repository contains the MATLAB implementation source code accompanying the book “MIMO-OFDM 无线通信技术及 MATLAB 实现” (MIMO-OFDM Wireless Communication Technology and MATLAB Implementation). The repository is structured to match chapters in the book, providing code for topics such as OFDM basics, MIMO channel models, channel estimation, PAPR, spatial multiplexing, diversity techniques, etc. It helps readers replicate examples in the textbook and test MATLAB simulations of wireless communication... -
23
dlnAP
DLNA server for audiophiles with support of FLAC and DSD files
DLNA server (multiplatform) for personal computers with support of high resolution DSD, FLAC and WAV files (OGG, WMA and MP3 is also supported). Stream your personal files to various stream players using LAN or wireless WLAN (Wi-Fi). -
24
OpenVoucher
Open source voucher management / hotspot system
OpenVoucher is an open source voucher management / hotspot system for authenticating guests in your wifi or cable network. It is designed to be easy to use for anyone who wants to issue vouchers. For further information and installation how to's, see the project's homepage. The source code is maintained on Github. -
25
Netdiscover is a network address discovering tool that was developed mainly for those wireless networks without DHCP servers, though it also works on wired networks. It sends ARP requests and sniffs for replies.