Search Results for "os windows"

A CCD capture software intended for the amateur astronomer. It include all the features required to perform digital imaging CCD observation of celestial objects. Using the standard drivers protocol INDI and ASCOM it can connect and control the CCD camera, the focuser, the filter wheel and the telescope mount. This software is part of a full suite for astronomical...

... Circles is developed with .NET 7 and AvaloniaUI Framework using MVVM architecture patern. Program was tested on Windows 10 and 11, Ununtu Linux 22.04.1 LTS (Wayland) and Raspberry PI OS Bullseye. I'm not able to test it on macOS, but it should work. Suggestions and contributions are welcome!

A set of cross-platform tools for connecting via TCP/IP to the VOEvent transient astronomy alert network. Tools include a receiver/broker, a sender/publishing tool, and a VOEvent message checker. Runs on Linux, Mac OS X and Microsoft Windows.

PARot is a program for ultra fast and precise polar alignment of equatorial mounts. You can easily achieve alignment accuracy better than 1 arcmin in 5 minutes of time. You take one image of the celestial pole, rotate the mount around the RA axis and take another image. The program compares the images and shows you the necessary adjustment. The adjustment process is controlled by the live-liew created by your camera. Requirements: * A computer with Windows OS (tested with WinXP x64, Win7...

This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. The platform is based...

... PyAstronomy pymc Installation is possible from source code or using build installation binary file (only for OS Windows). The following procedure is only for installation from the source code. Extract files and go to new-created folder. Running script setup.py the installation will be done: python setup.py install