Search Results for "en-os"
Sort By:
Showing 15 open source projects for "en-os"
View related business solutions-
Retool your internal operationsBuild internal software that meets enterprise security standards without waiting on engineering resources. Retool connects to your databases, APIs, and data sources while maintaining the permissions and controls you need. Create custom dashboards, admin tools, and workflows from natural language prompts—all deployed in your cloud with security baked in. Stop duct-taping operations together, start building in Retool.
-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
1
CCDciel
Astronomy CCD capture software
A CCD capture software intended for the amateur astronomer. It include all the features required to perform digital imaging CCD observation of celestial objects. Using the standard drivers protocol INDI and ASCOM it can connect and control the CCD camera, the focuser, the filter wheel and the telescope mount. This software is part of a full suite for astronomical... -
2
-
3
CollimationCircles
Collimation Circles, app for easy telescope collimation
...Collimation Circles is developed with .NET 7 and AvaloniaUI Framework using MVVM architecture patern. Program was tested on Windows 10 and 11, Ununtu Linux 22.04.1 LTS (Wayland) and Raspberry PI OS Bullseye. I'm not able to test it on macOS, but it should work. Suggestions and contributions are welcome! -
4
A set of cross-platform tools for connecting via TCP/IP to the VOEvent transient astronomy alert network. Tools include a receiver/broker, a sender/publishing tool, and a VOEvent message checker. Runs on Linux, Mac OS X and Microsoft Windows.
-
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
5
AlienPupOS
LucidPup & SlackoPup 5.x.x with Wine & Bionc pre-installed
One persons quest to keep outdated hardware out of our landfills by putting them back in use with a modern lightweight Operating System. Linux LucidPup 5.2.8 and SlackoPup 5.3.3 have been used as the base OS for this project for two reasons, compact and portable. Both versions come in two flavors: "MeatyBones" basic barebones get the job done with Wine and Boinc pre-installed "BaconBits" which is the Flagship of this project and will come with "BoincTasks", "SetiMapView" and "SETIsprint" pre-installed atop of Wine and Boinc. ... -
6
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232... -
7
PARot polar aligner
Software for polar alignment of equatorial mounts
...The program compares the images and shows you the necessary adjustment. The adjustment process is controlled by the live-liew created by your camera. Requirements: * A computer with Windows OS (tested with WinXP x64, Win7 x64, Win7 x86). * Maxim DL version 5. * A camera which can be controlled from MaxIm. * A combination of telescope and camera such that the camera can 'see' a star in any field with the exposure time of a few seconds. * A view of the celestial pole. It can't be blocked, e.g., by ground objects. * Read the manual please! -
8
Maroc
Software para la Medición Automática de la Oscuridad del Cielo
Aplicación para facilitar la toma de datos del nivel de oscuridad del cielo nocturno usando un SQM-LU y aplicando las directivas establecidas por la SEA en el proyecto NIXNOX. La aplicación se conecta via TCP/IP a una raspberry pi que controla tanto un brazo robot como el SQM-LU. Las instrucciones para configurar la raspberry pi estarán disponible en breve en: http://www.luz-cero.es/maroc -
9
NexStarCtl
Cross platform Perl API to control NexStar compatible telescopes
This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
Yeastar: Business Phone System and Unified CommunicationsUser-friendly, optimized, and scalable, the Yeastar P-Series Phone System redefines business connectivity by bringing together calling, meetings, omnichannel messaging, and integrations in one simple platform—removing the limitations of distance, platforms, and systems.
-
10
astroDevice
Software platform for the control of astronomical instruments.
astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. The platform is based... -
11
MoonPlanner
Moon calendar: shows moon's phase, signs and relatives plant's part
...For every calendar's day the user can attach notes (that are stored in a persistent database). At the startup the program will remind you if there will be notes for current day. Timezones and localizations (En, IT) are supported by the application. This calendar is usable between 1900 and 2020. This tool can be useful to plan gardening tasks or to view some astrology informations. References and requirements: - JRE/JDK version 1.5 or later must be installed on host computer. - UI are made using SWT by Eclipse (see http://www.eclipse.org/swt/)... -
12
The IRAF64 Project is porting the IRAF software to the X86_64 Linux OS with NATIVE X86_64(Opteron,EM64T) executable.
-
13
-
14
AQUYNZA is a set of C++ libraries, sample programs and doc's for the modelling, visualization and persistence of 3D environments. Its modular and highly portable. Its primary objective is helping to learn (and teach) computer graphics. (code in SPANISH)!
-
15
OCFit
Python package for fitting of O-C diagrams.
...The first release comming soon... Requirements numpy matplotlib PyAstronomy pymc Installation is possible from source code or using build installation binary file (only for OS Windows). The following procedure is only for installation from the source code. Extract files and go to new-created folder. Running script setup.py the installation will be done: python setup.py install
- Previous
- You're on page 1
- Next
