Search Results for "64 bit version"

Calculate Sunrise, Sunset and dawn times. The calculation based on sunriset by Paul Schlyter. 64 bit windows users: There are 64 bit windows binarys in the file section.

Lin-guider is an astronomical autoguiding program for Linux. It supports Philips, Logitech, uvc webcams, QHY5, QHY6, DSI2PRO, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for video and FTDI chip-based, parallel port-based (LPT), GPIO-based, GPUSB devices, Nexstar-protocol based and QHY5, QHY6, QHY5L-II-M, QHY5L-II-C, QHY5-II, ATIK, Starlight Xpress, ZWO ASI astrocams for pulse guiding. Starlight Xpress ltd. is helping this project http://www.sxccd.com/

This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232...

...It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here: https://sourceforge.net/projects/libnexstar/ Mac OSX binary is available here: http://sourceforge.net/projects/openpectool/files/prebuilt/openpectool-0.0.1.dmg/download

This is a linux project for who is a bit tired to have stupid-one camera-not networkable ccd control software. Multi-tire via tcp/ip and multicamera (i.e. one primary camera and a secondary one for guide/seek)