Search Results for "sd card recovery"

dzOS is a single-user single-task ROM-based operating system (OS) for my 8-bit homebrew computer dastaZ80, which runs on a Zilog Z80 processor. It is influenced by ideas and paradigms coming from Digital Research’s CP/M, but also from 8-bit computers of the 80s era.

This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE 2014-11-05...

Porting Android to the iPAQ 200/210/211/212/214 or equilivalent. It has a 4-inch VGA Screen (TFT LCD display), resistive touchscreen, WiFi, Bluetooth, SD/MMC, CF. Originally it is running Windows Mobile 6 Classic. For help, see README files and the wiki. This project is in Alpha state, that means it is not suitable for daily usage unless developing for the project. NOT FOR THE FAINTHEARTED AND/OR COMPUTER IDIOTS!

EtherCircuit Webserver SW / HW Project works with AVR ATMEGA644 20MHZ with MMC /SD Card and ENC28J60 stand alone ethernetcontroller. The software is written in Mikropascal. More details on Projekt-Website.

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

A combined hardware/software project to provide MMC/SD card reading/writing facilities to any device with an RS232 serial port. Intended initially for Palm devices with no built in storage expandability (III series, V series etc.).