Search Results for "sd"

...It is being used for the 12kB ramdisk(A:) and for storing the copy of the CCP (CP/M's shell) so it does not need to be loaded from the SD Card. It was more fun than you all think.

This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE 2014-11-05 =============== Now it is working and the SVN repositories has it all: Schematics, PCB layout, firmware for the CPLD and the firmware for the MCU. ...

Porting Android to the iPAQ 200/210/211/212/214 or equilivalent. It has a 4-inch VGA Screen (TFT LCD display), resistive touchscreen, WiFi, Bluetooth, SD/MMC, CF. Originally it is running Windows Mobile 6 Classic. For help, see README files and the wiki. This project is in Alpha state, that means it is not suitable for daily usage unless developing for the project. NOT FOR THE FAINTHEARTED AND/OR COMPUTER IDIOTS!

Tool for using syntax highlighting, code competion, ect, in sd.

EtherCircuit Webserver SW / HW Project works with AVR ATMEGA644 20MHZ with MMC /SD Card and ENC28J60 stand alone ethernetcontroller. The software is written in Mikropascal. More details on Projekt-Website.

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

SD is a new operating system developed in the Pascal language (FreePascal, FPC/FPK) and NASM for IA-32. It's main purpose is to provide a fast and simple 32-bit multitasking OS. The OS must have several DOS, Windows and Linux features and maybe Win32 emu.

A combined hardware/software project to provide MMC/SD card reading/writing facilities to any device with an RS232 serial port. Intended initially for Palm devices with no built in storage expandability (III series, V series etc.).