Search Results for "devices-mapper"
Sort By:
Showing 65 open source projects for "devices-mapper"
View related business solutions-
Paessler - Monitor Your Whole Network in MinutesWaiting weeks for a monitoring rollout isn't an option when infrastructure doesn't stop running. PRTG's auto-discovery scans your network and suggests from over 200 pre-configured sensor types, so you're watching servers, applications and devices within minutes, not after a multi-week deployment. Enterprise-strength monitoring, without the enterprise complexity. Start your free trial today.
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
spleen
Monospaced bitmap fonts
...Patrick Wildt (patrick@) recently imported ssdfb(4), a driver for small OLED displays in OpenBSD and needed a 5x8 font to be able to squeeze more columns and rows on those devices. As someone spending most of his time in a terminal, I have been thinking about drawing my own font for a while, and this was the perfect opportunity. To be able to test character spacing and alignment, I started to use the font in xterm, then a zoomed version, and one thing leading to another, I started creating a 8x16 version, and then bigger versions based on it. ... -
2
A crossplatform music editor for creating Commodore 64 music. Uses reSID library by Dag Lem and supports alternatively HardSID & CatWeasel devices.
-
3
...For the latest source, releases, bug tracking, use https://github.com/OpenCBM/OpenCBM instead! Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").
-
4
PICSimLab - Prog. IC Simulator Lab.
PICSimLab is a realtime emulator for PIC, Arduino, STM32, ESP32, ...
...For boards based on the PIC16F and PIC18F microcontrollers, the wizard generates projects that utilize MPLAB X. For boards based on AVR, STM32, and ESP32, the wizard generates projects that utilize VSCode+PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield. -
Host LLMs in Production With On-Demand GPUsDeploy your model, get an endpoint, pay only for compute time. No GPU provisioning or infrastructure management required.
-
5
Mjpeg tools is a suite of programs which support video capture, editing, playback, and compression to MPEG of MJPEG video. Edit, play and compression software is hardware independent. Capture supports MJPEG hardware (Buz,DC10+ etc). and V4l2 devices.
-
6
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
7
ASAP (Another Slight Atari Player) plays and converts 8-bit Atari music (*.sap, *.cmc, *.mpt, *.rmt, *.tmc, ...) on modern computers and mobile devices.
-
8
PacMan2 - The Family - Network Edition - Arcade game - opensourceware version of Pacman with NEW DESIGN and LOTS OF DEVICES (program's engine has got script executer - Squirrel(R)), in 2D version, semi-3D version and under development fully 3D It can be played by 2 players at the same PC or in multiplayer mode over the LAN-network (TCP/IP protocol, uses sockets)
-
9
Active Object real-time OS
AO RTOS is small real time OS based on Active Object concurrency model
AO-RTOS is a pure object-oriented small footprint real-time operating system for embedded devices. The project is using Active Object (or Actor) concurrency model and finite state machine (FSM) design template as implementation base. -
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
10
This project maintains the Linux Console tools, which include utilities to test and configure joysticks, connect legacy devices to the kernel's input subsystem (providing support for serial mice, touchscreens etc.), and test the input event layer.
-
11
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? ... -
12
HelloSilicon
An introduction to ARM64 assembly on Apple Silicon Macs
...Especially for the later three systems it is not a necessity per-se (neither is Xcode 12.2), but it makes things a lot simpler. Finally, while all samples can be adjusted to work on the iPhone and all other of Apple's ARM64 devices, for best results you should have access to an Apple Silicon Mac. -
13
xplgraph-cpmgsx-dxforth
An replacement of DXForth's xplgraph.scr library for CP/M
...Using this interface enables graphical output to either local screen or remote devices connected through a serial port (like Tektronix 4010 text-and-graphics terminal emulator running on PC). Limitations: - No colors, no shades of gray. Color 0 is blank, others are mapped to solid pixels. - No READPIX function. - PALETTE, SETPAL and SOUNDX are dummy. -
14
zxmmcfid
A ZXMMC mass storage device FID driver for CP/M
CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly well. ... -
15
Like OS
Real time preemptive embedded multi-thread kernel
This project is now in the research and development stage. It is intended for very small microcontrollers with a single processor and represent simple multithreading kernel what written by C language. Is planning create implementations for AVR8 and STM8, may be. Now it is suspended until better time. -
16
A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI LM3S1968, TI OMAP).
-
17
Our project focuses the development of an operating system with a most simple implementation and structure. The goal is to provide a good starting point for beginners along with accompanying documents.
-
18
Painless Pic Assembler
Collection of macros and libraries in assembly
This project contains a collection of macro ASM instructions for PIC microcontrollers to facilitate the programming of this devices in assembly language. -
19
SoftIB Serial Communicator
UART communications with data flow monitoring
A simple to use serial communication software for communicating with other serial, MCU and Arduino. The SoftIB Serial Communicator communicates with other Serial devices that use a simple asynchronous communication using only the RX and TX signals without any control signals. The application was developed based on the communication with microcontrollers, but it can be used in all other cases. -
20
JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.
-
21
Firmware for Cypress' EZ-USB (AN2131) device that lets you use keyboards, mice etc. as USB compliant Human Interface Devices.
-
22
ADI GNU toolchain
The GNU Toolchain for ADI's Blackfin and future processors
This project is no longer maintained by Analog Devices. For support, engage with the community at https://ez.analog.com/dsp/software-and-development-tools/linux-blackfin/. You have found the home page of the GNU toolchain project for ADI's Blackfin an future processors. This is the central site for all toolchain components whether you are targetting to run Linux or bare metal on the Blackfin and future processors, running on Linux or Windows hosts. -
23
FFT for ARMv6
Fixed point 16/32 integer FFT library for the Raspberry Pi and Android
This library is being created as I have a need to do very fast FFTs on low end devices not supporting the NEON instruction set. The Raspberry Pi is an ideal candidate for developing in gcc before porting to JNI for low spec Android devices, hence it's inclusion. Fixed point 16/32 integer FFT library suitable for the Raspberry Pi and Android devices. Includes test stubs for gcc on the Raspberry Pi and a Basic4Android wrapper from JNI. -
24
eXtensible Modular Hypervisor Framework
Hypervisor R&D for recent x86 with support for DRTM + 2D paging
...XMHF advocates a "rich" single-guest execution model where the hypervisor framework supports only a single-guest and allows the guest direct access to all performance-critical system devices and device interrupts. XMHF currently runs on recent multicore x86 hardware virtualized platforms with support for dynamic root of trust and nested (2-dimensional) paging. The framework is capable of running unmodified legacy multiprocessor capable OSes such as Windows and Linux. Documentation available at: http://xmhf.sourceforge.net/doc -
25
LabMonkey Embedded Automation Platform
Create networks of embedded devices for data logging/automation tasks.
...To achieve this, a protocol has been designed specifically for the task, and implemented in assembler for AVR microcontrollers. The project is currently at the stage of testing the protocol for bugs and implementing some simple devices which use it.
