Search Results for "atmega"

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

...This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

...The original tuner used an semidigital remote controller and 24line cable between the tuner unit and remote controller. I decided me to build the tuner unit and replaced the controller part by an ATmega MCU on both sides and linked them with cheap network cable. The used protocol between the controllers are RS422 based and is frame based with checksum. The tuner relays are switched each sepperate and the I/O unit are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. I decided me to use I2C-Bus Expanders instead using an ATmega 1284p and direct I/O handling in the expanding capability of this concept. ...

Kmax 8bit microkernel for AVR ATMega MCUs written in assembler (AVRASM & GCC compatible) with a C API. Core features include priority-based preemptive round-robin scheduling, mutexes, fifos and semaphores with a focus on speed and ease of use.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.