Search Results for "lcd i2c"

#3B - smart LCD hardware driver controlled by an ATmega328P as I²C slave. Hardware, Software and Documentation.

The CH347 multi-functional interface demonstration software is an open-source debugging tool that integrates six core functions: SPI, I2C, JTAG, SWD, UART, and GPIO. It comprehensively covers the core communication protocols and peripheral control scenarios of the CH347 chip. Each chapter of the software demonstrates the functions of each interface. The I2C interface implements temperature and humidity sensor data acquisition, the JTAG and SWD interfaces complete program download and debugging for FPGA and MCU, the UART interface meets basic serial communication requirements, the GPIO interface adapts to peripheral control pins, and the SPI interface drives the ST7798 LCD screen and implements image polling display. ...

The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ......

This reflow oven controller was built to control a modified toaster oven for the purpose of doing reflow soldering of printed circuit boards. The controller was designed and built around an ESP32-DevKitC development board with ancillary electronics added to complete the controller. The schematic can be found in <files/hardware>. The code for the controller was modified extensively from existing Arduino sketches for reflow oven controllers and is PID-algorithm based. The firmware...

ocapi is an open source driver collection for MSP430 and derivative processors. It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used...

This reflow oven controller was built to control a modified toaster oven for the purpose of doing reflow soldering of printed circuit boards. The controller was designed and built around an ESP32-DevKitC development board with ancillary electronics added to complete the controller. The schematic can be found in <files/hardware>. The code for the controller was modified extensively from existing Arduino sketches for reflow oven controllers and is PID-algorithm based. The firmware...

C# library for the HD44780 controller and a I2C-Adapter PCF8574T. Prerequisite: -Raspberry Pi -Installed Mono or NetCore -Installed Wiring Pi Library -connected LCD display over I2C (A00) Features: -Simple design and display own chars (see progress demo) -German umlaute -Access easy special chars like pi, degree,omega .... -Display strings center, left and right align -Control backlight,Cursor,Display -simple interface

This is a complete SD Card image for Orange Pi Zero - Armbian - Logitech Media Server nightly autoupdate - Squeezelite Player with conf for PCM2704 DAC - Python code for 16x2 i2C LCD Please download ALL the 6 files, not only one file. Use "Browse all files" to get the rar files. https://sourceforge.net/projects/orangepizero-lms-squeezelite/files/

...These sensors are attached to the Sensor Controller Module via slow speed I2C bus. The modules use 2-pin probes and drives them with 4 kHz square wave in order to avoid oxidating the probes. In my implementation I used these small water pumps from Conrad: http://www.conrad.hu/conrad.php?name=Products&pid=539090 The whole system is powered by a 12V / 4A SMPS.

Python Lib to Control a I2C-LCD Display with PCF8574 expander.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

A open LCD controller (both hardware and software) offering I2C, SPI and Serial interfaces.

A solution for Home automation, with HTTP access to manage Tini Board, X10 - I2C - LCD components. You can add your own manager and exchange his services with other. All manager are plug on a kernel (Servlet Java).