Search Results for "eeprom flash"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At...

Easily program your arduino board with flash & EEPROM management support

STM8uLoader Smallest size UART bootloader for STM8 models without built-in bootloader. It takes the size from 8 bytes FLAH memory and up to 53 bytes EEPROM memory and/or OPTION Bytes memory area.

flAVR is a simulator for the Atmel(tm) AVR(tm) microcontrollers written in C. The project aims to implement a cycle-accurate AVR CPU core simulator along with a range of peripherals, allowing firmware written for a variety of parts to be run on a host PC. In addition, flAVR provides enhanced interactive debugging functionality - featuring breakpoints, data watchpoints, execution tracebuffers, flash/RAM/EEPROM viewers, and run-time disassembler. flAVR also implements the GDB remote...

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

A low cost parallel port programmer platform is created. It is designed to program all kinds of eeprom,flash,ect...

Yack is an open source CW keyer library and application for the ATMEL AVR Architecture. It has been natively designed for an ATTINY45 Chip but can be adapted to other chips too. This is a hardware / HAM Radio application. How to install: Download the binary package, flash main.hex file into Flash memory and main.eep into EEPROM using AVRdude. For more details and documentation please retrieve the latest complete source code from the SVN repository. Suggestions, feature requests...

This application allow you work with many kind of AVR chips.Architecture is designed on plugin system, it mean each HW tool for programming (for example STK500) is one plugin of this application. Current version support only STK500v2 HW tool.

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.

hcs12mem is a command line tool for embedded microcontroller developers using Freescale's HC12/S12-family MCUs. Main features: reading/writing/erasing internal memories (FLASH/EEPROM), securing/unsecuring MCU, upload and execution of arbitrary code.

Atmel AVR microcontroller In-System-Programming solution for Palm OS. Provides GUI to upload, download and verify flash ROM and EEPROM images and edit fuse bit settings. Supports the AVR ISP, STK500, AVR910, and Butterfly programmers.

PalmPIC is a Microchip PIC programmer running on PalmOS compatible devices. You can read, write and verify PIC16 series FLASH ROM and EEPROM memory. Complete hardware/software portable solution.

Mprog is a tool designed for programming microcontroller. At the moment it supports only Atmel AVR microcontroller It support read / write programm flash / eeprom. To file firmat are supported: binary & Intel hex.

In-System-Programmer for ATMEL AT89S8252 Microcontroller. This program for the LINUX platform is able to read and write the Flash and EEPROM Memories of an ATMEL AT89S8252 microcontroller connected to the parallel port of a PC.

An universal programmer for EPROM/EEPROM/FLASH chips (27Cxx/28Fxx/29Fxx), Microchip PIC and Atmel Microcontrollers, Serial EEPROM (24Cxx,93Cxx,25xx,others), JTAG interface, and other devices. Configurable to support virtualy any device.

This software can be used to enter the bootstrap mode on Sagem (TM) GSM mobile phones and execute some program on their internal CPU. This might be useful for writing into the flash memory, repairing EEPROM contents or just for educational purposes.