Search Results for "atheros"

... adapters that support the 802.11n Wi-Fi standard. These adapters could be internal (like those built into laptops or desktop motherboards) or external (such as USB Wi-Fi dongles). Specifically, the driver is commonly associated with devices that use certain chipsets, like those made by companies such as Realtek, Atheros, Ralink, or Broadcom.

exGENT version 240201/240125 Linux Live System is - as the name suggest - based on Gentoo Linux. The best thing with exGENT is the premier auto detection of hardware and the ability to relatively easy install the system to hard drive during a live session. (Calamares Installer). LXQt 1.4 is used as Desktop environment. Used kernel: 6.7.1/6.1.67. exGENT runs on all "normal" and fairly new computers. They run very well also in VirtualBox/VMware. INSTALLATION The systems can easily be...

..., it covers the bigger named packages and some of the drivers installed for the various supported SDRs such as the HackRF One, RTL-SDR, and LimeSDR. Aircrack-ng GQRX Kalibrate-hackrf wireshare gr-gsm rtl-sdr HackRF IMSI-catcher zen map firmware-iwlwifi/ralink/atheros/b43 inspectrum qspectrumanalyzer LTE-Cell-Scanner CubicSDR Limesuite ShinySDR SDRAngel SDRTrunk Kismet

**This is only for Z2 PLUS running on Android 10** ***This is for educational purpose only, I AM NOT RESPONSIBLE FOR ANY MISUSE OR ILLEGAL USAGE**** This is the kernel required by Nethunter & Andrax Pentesting platforms to make use of the WiFi Adapter via OTG for WiFi Pentesting.

FOR ZUK Z2 PLUS -PIE ONLY!! 1.Wifi monitor and injection mode support enabled. 2.USB MODEM CDC ACM and Proxmark and similair devices support enabled(*NEW*)

.... Namely you want to find a USB adapter with one of the following chipsets: Atheros AR9271, Ralink RT3070, Ralink RT3572, or Ralink RT5572. You will be prompted for the WiFi adapter to use for scanning. Make sure to use an adapter that supports "monitor" mode. You can modify the scan time, designate the adapter, or modify the output using some command-line options.

this program is extremely easy to use, it must be run as root from the bash shell. Your wifi card must support promiscuous mode, generally speaking most atheros, broadcom, realtek, or *some intel chipsets will work. However testing it PROBABLY wont hurt anything if your card doesn't support it. Any redistributions of this work must cite the original author mentioned in the source. This tool is distributed on a "do as you will" basis, meaning I'm not responsible for anyone's actions with it.

Here are Code Snippets for both processors on Arduino Yún: - Atheros AR9331 running openWRT - ATmega32u4 Arduino IDE V1.5.4 is the first version supporting Arduino Yún. In October 2014 I used Arduino IDE V1.5.7 for Arduino Yún & Dragino Yún shield with Arduino Leonardo Please pay attention to the IDE version when you port Arduino sketches build with an IDE version less then 1.0.! Published in May 2015: Arduino for the Cloud: Arduino Yún and Dragino Yún Shield by Universal...

This is a branch from the DD-WRT that mainly supports Atheros routers. The original DD-WRT version is v24-pre SP2, checkout version 21876.

Workaround for Red Hat Enterprise Linux (RHEL and clones) version 5.x series with Atheros AR9285 and AR9287 (and similar) wireless adapters. Mitigates failure to connect to wireless access point.

ArchOne is an archlinux-based live usb designed for Acer Aspire One netbook (it also compatible with other netbook). For more info, visit http://archone.sourceforge.net

The SDIO-Linux project provides an open source SDIO-stack. The stack comes complete with drivers for the Host and Bus controllers, SD/MMC memory cards, SDIO-bluetooth and Atheros’ WLAN driver.

Multiband Atheros Driver for WiFi (MADWIFI): Linux driver for 802.11a/b/g Cardbus/PCI/MiniPCI cards using Atheros chipsets. *** Attention: homepage moved to http://madwifi-project.org - files from sf.net CVS deprecated! ***

ROBIN is a 0-config mesh network firmware, it's deployed on OpenWRT kamikaze for Atheros AP51 mini-routers such as Meraki Mini or Fonera

Just an another passive 802.11b scanner. It can dump traffic in realtime (like tcpdump) and you can change interactively the sniffed channel. Work with Cisco, Prism, Prism54g, Lucent, Orinoco, Centrino and Atheros card