-
Hello Nicolas.
Thanks for the information.
I am using the "EPE Toolkit mk3" [1] from "Everyday Practical Electronics" magazine October 2001. I have the kit version supplied by Magenta Electronics Ltd [2]. I don't suppose that many people are still using this board!
The programming software was specially written by the designer for the board [3] in Visual Basic for...
2007-09-10 18:04:30 UTC in Piklab
-
Thanks Nicolas.
I have indeed been able to set the configuration I need from the GUI, and also test the connections with the check boxes. Excellent! The configuration has also turned up in ~/.kde/share/config/piklabrc as you suggested.
Unfortunately, I am only able to connect to and read the PIC by manually resetting the PIC just before I issue the "Connect" and "Read"...
2007-09-07 13:08:02 UTC in Piklab
-
I am running piklab version 0.14.5 on Debian Etch.
I want to use piklab-prog with a parallel port programmer with these connections:
D0 - write data
D1 - clock
D4 - MCLR
ACK - read data
I tried using the "direct" programmer on /dev/parport0 as user root:
# piklab-prog --device 16F84A -c connect --programmer direct
piklab-prog: version 0.14.5 (rev. distribution)
Session...
2007-09-07 07:55:45 UTC in Piklab
-
This is how it works in Linux.
1. Make sure that you have installed Python and GPASM.
2. Download and unpack the tarball.
$ tar -xzvf Pyastra-0.0.4.1.tar.gz
3. Change to the directory created by unpacking the tarball.
$ cd Pyastra-0.0.4.1
4. Read the README.txt and INSTALL.txt files.
5. Switch user to root.
$ su
6. Use the python "setup" script to install...
2007-04-17 15:01:25 UTC in Pyastra
-
Logged In: YES
user_id=417380
SOLVED
Obvious once I had twigged. I was entering the scp command
in the sourceforge shell when I should have used the local
shell.
Thanks.
2006-01-13 09:10:42 UTC in SourceForge.net
-
I have posted my ssh key and I can log in OK. I cannot
copy a file with scp - it times out. Permissions on the
file are -rw-r--r--. Can you suggest what I am doing wrong?
-bash-2.05b$ scp -v
chrislale@shell.sourceforge.net:/home/users/c/ch/chrislale/newbiedoc/peripherals/printer.sgml
localhost:/home/chris/tmp/printer.sgml Executing:
/usr/bin/ssh -v -x -o'ClearAllForwardings yes' -n -l...
2006-01-12 17:00:22 UTC in SourceForge.net
-
chrislale committed patchset 171 of module web to the newbieDoc: docs by & for Debian newbies CVS repository, changing 23 files.
2004-05-11 14:53:15 UTC in newbieDoc: docs by & for Debian newbies
-
chrislale committed patchset 257 of module newbiedoc to the newbieDoc: docs by & for Debian newbies CVS repository, changing 2 files.
2004-05-11 14:50:32 UTC in newbieDoc: docs by & for Debian newbies
-
chrislale committed patchset 256 of module newbiedoc to the newbieDoc: docs by & for Debian newbies CVS repository, changing 2 files.
2004-04-30 21:50:38 UTC in newbieDoc: docs by & for Debian newbies
-
chrislale committed patchset 170 of module web to the newbieDoc: docs by & for Debian newbies CVS repository, changing 22 files.
2004-04-30 21:50:38 UTC in newbieDoc: docs by & for Debian newbies
