-
The Tarifa firmware has an option to enable klog and syslog.
see: http://192.168.1.1/Management.asp to enable.
If the klogd and syslogd program run, ALL logged data will be send to a pc, on this pc a log client has to be installed to view syslog and klog.
To enable iptables to log goto: http://192.168.1.1/Log.asp and enable.
Greetings,
jchuit.
2008-06-16 17:53:11 UTC by jchuit
-
PPOE connection up/down and granular PPOE failure codes useful.
2008-06-12 18:46:38 UTC by nobody
-
Current Linksys in/out logging is minimal. If possible to log system events please add.
2008-06-03 04:14:01 UTC by nobody
-
The syslogd(klogd) used is the one out of busybox:
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_LOGREAD=y
# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
CONFIG_KLOGD=y
CONFIG_LOGGER=y
The busybox version is very limited and does not...
2008-01-07 13:58:10 UTC by jchuit
-
At the moment the remote syslog messages use various facilities, making it difficult to filter them using the standard syslog.conf selection mechanisms. Please consider using a fixed (configurable) syslog facility like local0 instead.
2008-01-07 01:25:22 UTC by rvdb
-
After a stability problem you must load the factory defaults by use of the
reset button (or shortcutting pin 15 and 16 from the EPROM), keep it 30 seconds pressed during boot.
Set the clockfreq from 200 to 216 Mhz:
Go to telnet and type,
nvram set clkfrq=216
nvram commit
reboot.
2007-10-16 20:20:39 UTC by jchuit
-
yah the problem is i have the v1 version,
CGN1 = WRT54GS v1.0
i wanted to at least bump it up to 216mhz, like the other models that you stated.
any way that i can do this?.
2007-10-16 20:04:39 UTC by nobody
-
Some overclocking is possible, but stable is a big question?
DD-wrt comes with an altered Linux-broadcom kernel, Tarifa uses the original.
If you use a wrt54g v2 to v3.1 or a wrt54gs v1 to 2.1 the clockfrequency is set to 216 Mhz after startup, the default CFE value of 200 Mhz isn't stable.
After a stability problem you must load the factory defaults by use of the reset button, keep is 30...
2007-10-16 19:41:13 UTC by jchuit
-
will overclocking be enabled for this firmware? i heard you can overclock it to 250mhz stable, look at this page:
http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX
please let us know if you will enable the overclocking function!
2007-10-16 15:47:40 UTC by nobody
-
Logged In: YES
user_id=1482280
The Parental_Control is implemented in the Tarifa firmware.
I didn't test it and it seems a link is missing in the Webpage of the router.
Goto http://192.168.1.1/Parental_Control.asp and sign-up.
Jchuit.
2006-11-01 18:33:42 UTC by jchuit
