DownloadThis library implements the serial commands supported by the Celestron
NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies
to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar
SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc.
SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the
corresponding Orion mounts.
Communication to the hand control is 9600 bits/sec, no parity and one
stop bit via the RS-232 port on the base of the hand control.
Communication can be established over TCP/IP if nexbridge is running
on the computer connected to the telescope.
To control network based telescopes nexbridge must be used on the remote site.
https://sourceforge.net/projects/nexbridge/
Features
- Can control network exported mounts with nexbridge
- Full support for SkyWatcher /Orion mounts (HC firmware > X.38.06)
- All published NexStar commands are supported
- Some AUX commands are supported since v.0.08
- Record / Play PEC data
- Download / uplod PEC data from/to the mount
- Set / Get mount backlash settings
- Set / Get autoguide rate
- Both Equatorial and Alt/Az mounts are supported
- Works with Linux, Mac OS X, FreeBSD, Solaris
License
GNU General Public License version 3.0 (GPLv3)Follow libnexstar
User Reviews
There are no 5 star reviews.