User Ratings

5.0 out of 5 stars
★★★★★
★★★★
★★★
★★
★
3
0
0
0
0
ease 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
features 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
design 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
support 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 3 / 5
Rate This Project
Login To Rate This Project

User Reviews

Filter Reviews:
All
  • alastair23 Edited 2022-02-26
    Have an issue with making card for 6AQ5, problem is with G1 voltage, Can set voltage to Gi (either or both pins 1/7) confirmed by external meter to 12.5V. On checking/setting using (parameter contol to -G1 volts) to use internal meter, press 'measure' and voltage at tube drops to -5.6V read on external meter, internal meter does not a read voltage. Tube red-plates of course, its a good tube....
  • iskusnik Edited 2021-08-12
    Большое спасибо за ваш генератор! Надеюсь, что этот проект будет поддерживаться . Из того, что хотелось бы видеть в нем, так это поддержка русского языка. Thank you so much for your generator! I hope that this project will be supported. From what I would like to see in it, it is the support of the Russian language.
  • alexey-am Edited 2018-01-03
    I have found a minor bug: When "04: Octal" is selected in socket selection drop-down box, "Octal (Nr. 7)" is still presented on printing. This is an incorrectness in file l33konverter_en.qm Bite 2A54 value in this file should be changed from 7 to 4. Also I want to thank author for so useful tool. I really makes my hobby easier.
    Reply from L3-3 Test Card Generator
    Edited 2019-11-17
    I didn't really get to work on the project the last years, but I did a quick (dirty) fix of this specific problem right now. (New snapshot should have fixed it, but please confirm!) Socket 4 and 7 are wired basically the same, but 7 has a choke in series with Pin 1 and an 1k resistor in series with Pin 4. Also a capacitor between pin 1 and 6, which is clearly some anti-oscillation-stuff.
  • Previous
  • You're on page 1
  • Next