Hi folks!
I am using Pardus Linux with kernel-2.6.18.6-73. I managed to compile cvs version of amedyn with success. I've made the neccessary changes on /ect/amedyn file as I am using pppoe.
I wrote amstart.sh
Firmware is loaded successfully. And then it gives an error continuously:
"Error retrieving info!"
dmesg out put is:
"usb 1-1: usbfs: usb_submit_urb returned -22"
again continuously.
What do you think is my problem? I'd appreciate any help. Thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'd like to answer te questions first.
1) Errors start when the line is being checked.
2) My connection is not working; unfortunately:(
3) I used the modem with this machine before with kernel 2.6.17 and 2.6.15 on Gentoo and on Pardus 1.0
4) I am using amedyn. I saw two files on Downloads section. amedyn-last and amedyn2-last. I don't know what xusbatm is.
I am not good with Linux by the way. As far as I see, they could not find a solution to the problem at the mails on the link supplied. What sould I do now?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi folks!
I am using Pardus Linux with kernel-2.6.18.6-73. I managed to compile cvs version of amedyn with success. I've made the neccessary changes on /ect/amedyn file as I am using pppoe.
I wrote amstart.sh
Firmware is loaded successfully. And then it gives an error continuously:
"Error retrieving info!"
dmesg out put is:
"usb 1-1: usbfs: usb_submit_urb returned -22"
again continuously.
What do you think is my problem? I'd appreciate any help. Thanks!
Check this mails:
http://www.mail-archive.com/speedtouch@ml.free.fr/msg08386.html
When start the errors?
Your connection work or you only get the errors?
Are you use the modem before with Linux on this machine?
What module you use, amedyn, amedyn2, xusbatm?
I'd like to answer te questions first.
1) Errors start when the line is being checked.
2) My connection is not working; unfortunately:(
3) I used the modem with this machine before with kernel 2.6.17 and 2.6.15 on Gentoo and on Pardus 1.0
4) I am using amedyn. I saw two files on Downloads section. amedyn-last and amedyn2-last. I don't know what xusbatm is.
I am not good with Linux by the way. As far as I see, they could not find a solution to the problem at the mails on the link supplied. What sould I do now?
> 1) Errors start when the line is being checked.
Before amload end?. Check:
http://zyxel630-11.sourceforge.net/uniwakka/wakka.php?wakka=IhaveAProblem
> 3) I used the modem with this machine before with kernel 2.6.17 and 2.6.15 on Gentoo and on Pardus 1.0
So, you get the problem after update your kernel? Or after update your distro? Can you try to use a old kenel?
> 4) I am using amedyn. I saw two files on Downloads section. amedyn-last and amedyn2-last. I don't know what xusbatm is.
Recheck the wiki: http://zyxel630-11.sourceforge.net/uniwakka/wakka.php?wakka=amedyn