Menu ▾ ▴

#1 Constant freezes on rtl8185

open
nobody
None
8
2007-03-29
2007-03-29
firewing1
No

Unfortunately the card is in a friend's machine, so debugging will be hard...

When using the driver for a rtl8185 card, the computer will always hang after a few minutes of system use. (2.6.19 kernel)

These seem to be random, as sometimes it will last only a few minutes and others half an hour, but it never lasts an hour before freezing.

No suspicious messages are found in /var/log/messages or when typing 'dmesg'. The freezes are pretty bad, too, since everything stops working - The keyboard, mouse, etc. Only pulling the plug works.

Confirmed on many distro support forums:
http://ubuntuforums.org/showthread.php?p=2220475
http://forums.gentoo.org/viewtopic-t-512513.html?sid=37ae0f68a30d3c60a190323ff1499372

Also, perhaps these can help:
https://launchpad.net/ubuntu/+bug/55905
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/77161

Related

Discussion: kernel BUG when linking with wlan

Discussion

  • firewing1

    firewing1 - 2007-03-29
    • priority: 5 --> 8
     

  • firewing1

    firewing1 - 2007-04-01

    Logged In: YES
    user_id=1253629
    Originator: YES

    Someone on the forums found the cause (spinlock):
    https://sourceforge.net/forum/message.php?msg_id=4113359

     

  • Bjoern

    Bjoern - 2007-06-09

    Logged In: YES
    user_id=1577209
    Originator: NO

    Maybe it is not the same bug you described, but my keyboard is freezing... mouse still works, so I can cut'n paste a dmesg together to get this bug. This occures randomly.

    Linking with FON_StarFonero
    ------------[ cut here ]------------
    kernel BUG at include/linux/timer.h:146!
    invalid opcode: 0000 [1] PREEMPT SMP
    CPU 0
    Modules linked in: w83627ehf hwmon i2c_isa eeprom mct_u232 saa6588 ieee80211_crypt_wep_rtl ieee80211_crypt_tkip_rtl ieee80211_crypt_ccmp_rtl wlan_xauth wlan_wep wlan_tkip wlan_scan_ap wlan_ccmp wlan_acl ath_rate_onoe(F) ath_rate_amrr(F) wlan_scan_sta ath_rate_sample(F) tuner ath_pci(F) wlan ath_hal(P) bttv video_buf ir_common btcx_risc tveeprom r8187(F) ieee80211_rtl ieee80211_crypt_rtl nvidia(P) i2c_i801 sky2 pata_jmicron
    Pid: 3439, comm: Ieee80211/0 Tainted: PF 2.6.21.3 #1
    RIP: 0010:[<ffffffff887912f1>] [<ffffffff887912f1>] :ieee80211_rtl:ieee80211_associate_step1+0x261/0x280
    RSP: 0018:ffff810079251e20 EFLAGS: 00010286
    RAX: 000000010002b237 RBX: 0000000000000100 RCX: 0000000000000000
    RDX: ffffffff88791267 RSI: 0000000000000001 RDI: ffff81007925f280
    RBP: ffff81007925e800 R08: ffff81007c206000 R09: ffff81007925f4c0
    R10: ffff8100625f41c0 R11: 000000000000002a R12: ffff8100625f41c0
    R13: ffff81007925e990 R14: 0000000000000286 R15: ffff8100686e9410
    FS: 0000000000000000(0000) GS:ffffffff80822000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    CR2: 00002ae278ea1000 CR3: 000000007a634000 CR4: 00000000000006e0
    Process Ieee80211/0 (pid: 3439, threadinfo ffff810079250000, task ffff8100013db080)
    Stack: 0000000000000000 ffff81007925f370 ffff81007925e800 ffff81007925ef40
    ffff81007925f370 ffffffff88791670 0000000000000000 ffffffff887916ef
    ffff81007925f378 ffff81007c3521c0 0000000000000286 ffffffff8024200f
    Call Trace:
    [<ffffffff88791670>] :ieee80211_rtl:ieee80211_associate_procedure_wq+0x0/0xb0
    [<ffffffff887916ef>] :ieee80211_rtl:ieee80211_associate_procedure_wq+0x7f/0xb0
    [<ffffffff8024200f>] run_workqueue+0x95/0x179
    [<ffffffff80242ae5>] worker_thread+0x0/0x150
    [<ffffffff80245786>] keventd_create_kthread+0x0/0x6d
    [<ffffffff80242bff>] worker_thread+0x11a/0x150
    [<ffffffff8022cebd>] default_wake_function+0x0/0xe
    [<ffffffff802459f6>] kthread+0xd1/0x103
    [<ffffffff8020a318>] child_rip+0xa/0x12
    [<ffffffff8022ef5a>] schedule_tail+0x6c/0xd4
    [<ffffffff80209a00>] restore_args+0x0/0x30
    [<ffffffff80241f8a>] run_workqueue+0x10/0x179
    [<ffffffff80245925>] kthread+0x0/0x103
    [<ffffffff8020a30e>] child_rip+0x0/0x12

    Code: 0f 0b eb fe 48 8b 77 10 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e
    RIP [<ffffffff887912f1>] :ieee80211_rtl:ieee80211_associate_step1+0x261/0x280
    RSP <ffff810079251e20>

    (driver was from a CVS snapshot jesterday)

    My hardware;
    lspci -vv
    00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub (rev c0)
    Subsystem: ASUSTeK Computer Inc. Unknown device 8178
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information

    00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (rev c0) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: ebe00000-efefffff
    Prefetchable memory behind bridge: 00000000c3600000-00000000e3500000
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    Capabilities: [88] #0d [0000]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Address: fee00000 Data: 4069
    Capabilities: [a0] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x16
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
    Slot: Number 0, PowerLimit 75.000000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    Slot: AttnInd Off, PwrInd On, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-

    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    Subsystem: ASUSTeK Computer Inc. Unknown device 81d8
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express Unknown type IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
    Link: Latency L0s <64ns, L1 <1us
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed unknown, Width x0

    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Prefetchable memory behind bridge: 00000000c3500000-00000000c3500000
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x0
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    Slot: Number 1, PowerLimit 10.000000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    Slot: AttnInd Unknown, PwrInd Unknown, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Address: fee00000 Data: 4071
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: ebd00000-ebdfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Address: fee00000 Data: 4079
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: ebc00000-ebcfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 6
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Address: fee00000 Data: 4081
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 4: I/O ports at e480 [size=32]

    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at e800 [size=32]

    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at e880 [size=32]

    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin D routed to IRQ 19
    Region 4: I/O ports at ec00 [size=32]

    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at efffbc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: e3700000-ebbfffff
    Prefetchable memory behind bridge: 00000000c3400000-00000000c3400000
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] #0d [0000]

    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information

    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at ffa0 [size=16]

    00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01) (prog-if 01 [AHCI 1.0])
    Subsystem: ASUSTeK Computer Inc. Unknown device 2606
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 1275
    Region 0: I/O ports at e400 [size=8]
    Region 1: I/O ports at e080 [size=4]
    Region 2: I/O ports at e000 [size=8]
    Region 3: I/O ports at dc00 [size=4]
    Region 4: I/O ports at d880 [size=16]
    Region 5: Memory at efffb800 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Address: fee00000 Data: 4091
    Capabilities: [70] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    Subsystem: ASUSTeK Computer Inc. Unknown device 8179
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 23
    Region 4: I/O ports at 0400 [size=32]

    01:00.0 Multimedia audio controller: Creative Labs SB X-Fi
    Subsystem: Creative Labs X-Fi Platinum
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (1000ns min, 1250ns max), Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at 9c00 [size=32]
    Region 1: Memory at eba00000 (64-bit, non-prefetchable) [size=2M]
    Region 3: Memory at e4000000 (64-bit, non-prefetchable) [size=64M]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000

    01:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
    Subsystem: Pinnacle Systems, Inc. (Wrong ID) PCTV pro (TV + FM stereo receiver)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (4000ns min, 10000ns max)
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at c34fe000 (32-bit, prefetchable) [size=4K]
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    01:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
    Subsystem: Pinnacle Systems, Inc. (Wrong ID) PCTV pro (TV + FM stereo receiver, audio section)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (1000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at c34ff000 (32-bit, prefetchable) [size=4K]
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    01:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
    Subsystem: Netgear Unknown device 5a00
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at eb9f0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. P5W DH Deluxe Motherboard
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at eb9ef800 (32-bit, non-prefetchable) [size=2K]
    Region 1: Memory at eb9e8000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME+

    02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
    Subsystem: ASUSTeK Computer Inc. Unknown device 81e4
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 17
    Region 5: Memory at ebcfe000 (32-bit, non-prefetchable) [size=8K]
    Expansion ROM at ebce0000 [disabled] [size=64K]
    Capabilities: [68] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Express Legacy Endpoint IRQ 1
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
    Link: Latency L0s <1us, L1 <16us
    Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1

    02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. Unknown device 81e4
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 16
    Region 0: I/O ports at ac00 [size=8]
    Region 1: I/O ports at a880 [size=4]
    Region 2: I/O ports at a800 [size=8]
    Region 3: I/O ports at a480 [size=4]
    Region 4: I/O ports at a400 [size=16]
    Capabilities: [68] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
    Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 16 bytes
    Interrupt: pin A routed to IRQ 1274
    Region 0: Memory at ebdfc000 (64-bit, non-prefetchable) [size=16K]
    Region 2: I/O ports at b800 [size=256]
    Expansion ROM at ebdc0000 [disabled] [size=128K]
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
    Address: 00000000fee00000 Data: 40b1
    Capabilities: [e0] Express Legacy Endpoint IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
    Link: Latency L0s <256ns, L1 unlimited
    Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1

    05:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) (prog-if 00 [VGA])
    Subsystem: ASUSTeK Computer Inc. Unknown device 81f7
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at ed000000 (64-bit, non-prefetchable) [size=16M]
    Region 5: I/O ports at cc00 [size=128]
    [virtual] Expansion ROM at efee0000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [78] Express Endpoint IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <256ns, L1 <4us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x16

    USB:

    Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 010: ID 1606:0230 Umax [hex] Astra 2200/2200SU
    Bus 001 Device 002: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
    Bus 001 Device 008: ID 05e3:0606 Genesys Logic, Inc.
    Bus 001 Device 012: ID 0bda:8187 Realtek Semiconductor Corp.
    Bus 001 Device 007: ID 05e3:0606 Genesys Logic, Inc.
    Bus 001 Device 009: ID 04a9:10a5 Canon, Inc.
    Bus 001 Device 011: ID 0424:223a Standard Microsystems Corp. 8-in-1 Card Reader
    Bus 001 Device 001: ID 0000:0000
    Bus 005 Device 001: ID 0000:0000
    Bus 004 Device 001: ID 0000:0000
    Bus 004 Device 002: ID 057c:3800 AVM GmbH BlueFRITZ! Bluetooth Stick
    Bus 003 Device 003: ID 046d:0b04 Logitech, Inc.
    Bus 003 Device 005: ID 046d:c714 Logitech, Inc.
    Bus 003 Device 004: ID 046d:c713 Logitech, Inc.
    Bus 003 Device 001: ID 0000:0000
    Bus 003 Device 002: ID 1130:cc00 Tenx Technology, Inc

    Mainboard is a Asus P5W-DH Delux

    Linux freax 2.6.21.3 #1 SMP PREEMPT Fri Jun 8 14:00:00 CEST 2007 x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux

    hope it helped

    regards
    Bjoern

     

  • Bjoern

    Bjoern - 2007-06-09

    Logged In: YES
    user_id=1577209
    Originator: NO

    forgot to mention I have a Asus AP Solo WIFI (RTL8187)

     

  • SilverCityProductions

    SilverCityProductions - 2008-02-18

    Logged In: YES
    user_id=1964362
    Originator: NO

    Have rtl8185 w/rf8225, and get the freezes. I noted that when using a trendnet usb wireless dongle, that the command
    sudo iwlist (intfc) event
    provides a list of the card's events.

    entering the same command for the rtl8185 when it is active, prior to the freeze, gets no events listed. The command executes normally, just shows no events.

     

Log in to post a comment.