parapin-users Mailing List for Parapin

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hey Parapin   https://goo.gl/gDbS6P
Good morning Parapin

http://pierrelogis.fr/addtocart.php?force=2n7nch5f3hq4rcp

Thanks!
Hey ,

I was asked to vouch for  people to join FounderDating - an invite-only network for entrepreneurs to connect with world-class advisors, potential cofounders and, of course, other entrepreneurs. There are really amazing people. You’re on my short list. I highly recommend applying no matter what stage you’re in.

Apply here > http://members.founderdating.com/connect/?frvche=348698&s=

Check it out,
Daniel
Maxim.

It has been several years since we have had to do *anything* with parapin.
It has just worked, even as the kernels have evolved.

Please submit a bug report in the paragon bug tracker, with the following
information:

Description of what you are trying to do.

Full contents of the dmsg log file after a full boot.

Full contents of /etc/devices

Messages from /etc/syslog or /etc/messages that pertain to paragon or other
parallel port activities.

I can't make any guarantees, because we are very busy, but we will see if
we can track down what's happening.

--Al
On Mar 22, 2015 8:18 AM, "Максим Гаврилов" <gav...@ma...> wrote:

> email is gav...@ma...
>
> Does the project have the support? I can not use the parapin in KERNEL
> mode in Ubuntu 12.04.5 lts.
>
> Maxim.
>
>
> -------- Пересылаемое сообщение --------
> От кого: par...@li...
> Кому: gav...@ma...
> Дата: Воскресенье, 22 марта 2015, 15:04 UTC
> Тема: Welcome to the "parapin-users" mailing list
>
>  Welcome to the par...@li...
> <https://e.mail.ru/compose?To=parapin%2d...@li...>
> mailing list!
>
> To post to this list, send your email to:
>
>   par...@li...
> <https://e.mail.ru/compose?To=parapin%2d...@li...>
>
> General information about the mailing list is at:
>
>   https://lists.sourceforge.net/lists/listinfo/parapin-users
>
> If you ever want to unsubscribe or change your options (eg, switch to
> or from digest mode, change your password, etc.), visit your
> subscription page at:
>
>
> https://lists.sourceforge.net/lists/options/parapin-users/gavrimax%40mail.ru
>
>
> You can also make such adjustments via email by sending a message to:
>
>   par...@li...
> <https://e.mail.ru/compose?To=parapin%2dusers%2dr...@li...>
>
> with the word `help' in the subject or body (don't include the
> quotes), and you will get back a message with instructions.
>
> You must know your password to change your options (including changing
> the password, itself) or to unsubscribe. It is:
>
>   sultan1987
>
> Normally, Mailman will remind you of your lists.sourceforge.net
> mailing list passwords once every month, although you can disable this
> if you prefer. This reminder will also include instructions on how to
> unsubscribe or change your account options. There is also a button on
> your options page that will email your current password to you.
>
> ------------------------------
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming The Go Parallel Website,
> sponsored
> by Intel and developed in partnership with Slashdot Media, is your hub for
> all
> things parallel software development, from weekly thought leadership blogs
> to
> news, videos, case studies, tutorials and more. Take a look and join the
> conversation now. http://goparallel.sourceforge.net/
> _______________________________________________
> parapin-users mailing list
> par...@li...
> https://lists.sourceforge.net/lists/listinfo/parapin-users
>
>

Sorry, "/etc/syslog"  and "/etc/messages"  should be "/var/log/... ".   I'm
not awake yet this morning...
On Mar 22, 2015 9:13 AM, "Al Hooton" <al...@ho...> wrote:

> Maxim.
>
> It has been several years since we have had to do *anything* with
> parapin.  It has just worked, even as the kernels have evolved.
>
> Please submit a bug report in the paragon bug tracker, with the following
> information:
>
> Description of what you are trying to do.
>
> Full contents of the dmsg log file after a full boot.
>
> Full contents of /etc/devices
>
> Messages from /etc/syslog or /etc/messages that pertain to paragon or
> other parallel port activities.
>
> I can't make any guarantees, because we are very busy, but we will see if
> we can track down what's happening.
>
> --Al
> On Mar 22, 2015 8:18 AM, "Максим Гаврилов" <gav...@ma...> wrote:
>
>> email is gav...@ma...
>>
>> Does the project have the support? I can not use the parapin in KERNEL
>> mode in Ubuntu 12.04.5 lts.
>>
>> Maxim.
>>
>>
>> -------- Пересылаемое сообщение --------
>> От кого: par...@li...
>> Кому: gav...@ma...
>> Дата: Воскресенье, 22 марта 2015, 15:04 UTC
>> Тема: Welcome to the "parapin-users" mailing list
>>
>>  Welcome to the par...@li...
>> <https://e.mail.ru/compose?To=parapin%2d...@li...>
>> mailing list!
>>
>> To post to this list, send your email to:
>>
>>   par...@li...
>> <https://e.mail.ru/compose?To=parapin%2d...@li...>
>>
>> General information about the mailing list is at:
>>
>>   https://lists.sourceforge.net/lists/listinfo/parapin-users
>>
>> If you ever want to unsubscribe or change your options (eg, switch to
>> or from digest mode, change your password, etc.), visit your
>> subscription page at:
>>
>>
>> https://lists.sourceforge.net/lists/options/parapin-users/gavrimax%40mail.ru
>>
>>
>> You can also make such adjustments via email by sending a message to:
>>
>>   par...@li...
>> <https://e.mail.ru/compose?To=parapin%2dusers%2dr...@li...>
>>
>> with the word `help' in the subject or body (don't include the
>> quotes), and you will get back a message with instructions.
>>
>> You must know your password to change your options (including changing
>> the password, itself) or to unsubscribe. It is:
>>
>>   sultan1987
>>
>> Normally, Mailman will remind you of your lists.sourceforge.net
>> mailing list passwords once every month, although you can disable this
>> if you prefer. This reminder will also include instructions on how to
>> unsubscribe or change your account options. There is also a button on
>> your options page that will email your current password to you.
>>
>> ------------------------------
>>
>>
>> ------------------------------------------------------------------------------
>> Dive into the World of Parallel Programming The Go Parallel Website,
>> sponsored
>> by Intel and developed in partnership with Slashdot Media, is your hub
>> for all
>> things parallel software development, from weekly thought leadership
>> blogs to
>> news, videos, case studies, tutorials and more. Take a look and join the
>> conversation now. http://goparallel.sourceforge.net/
>> _______________________________________________
>> parapin-users mailing list
>> par...@li...
>> https://lists.sourceforge.net/lists/listinfo/parapin-users
>>
>>

 email is  gav...@ma...

Does the project have the support? I can not use the parapin in KERNEL mode in Ubuntu 12.04.5 lts.

Maxim.

-------- Пересылаемое сообщение --------
От кого: par...@li...
Кому: gav...@ma...
Дата: Воскресенье, 22 марта 2015, 15:04 UTC
Тема: Welcome to the "parapin-users" mailing list

Welcome to the  par...@li... mailing list!

To post to this list, send your email to:

   par...@li...

General information about the mailing list is at:

   https://lists.sourceforge.net/lists/listinfo/parapin-users

If you ever want to unsubscribe or change your options (eg, switch to
or from digest mode, change your password, etc.), visit your
subscription page at:

   https://lists.sourceforge.net/lists/options/parapin-users/gavrimax%40mail.ru

You can also make such adjustments via email by sending a message to:

   par...@li...

with the word `help' in the subject or body (don't include the
quotes), and you will get back a message with instructions.

You must know your password to change your options (including changing
the password, itself) or to unsubscribe.  It is:

  sultan1987

Normally, Mailman will remind you of your lists.sourceforge.net
mailing list passwords once every month, although you can disable this
if you prefer.  This reminder will also include instructions on how to
unsubscribe or change your account options.  There is also a button on
your options page that will email your current password to you.

----------------------------------------------------------------------

 i have unzipped parapin-1.5.0.tgz from sourceforge.net and tried to do:- make- make installbut it failed telling that command not found [parapin.o] error 127
what should I do?thanks
Thank you for your email, Al.
And thanks in advance guys for any time and assistance you can spare. I
will be grateful.

Kind regards,
Diogo

On Mon, Oct 15, 2012 at 5:30 PM, Al Hooton <al...@vi...> wrote:

> Diogo,
>
> I am in the process of moving currently, and my dev environment for
> parapin is dismantled.  It will likely be a few more weeks before I will
> again have the ability to research this, although I will look at the code
> in the meantime and see if I have any ideas for you.
>
> If anyone on the list can assist Diogo more quickly, we would both
> appreciate it.  Thanks!!
>
> Regards, Al
>  On Oct 15, 2012 2:39 AM, "Diogo Alves" <dio...@gm...>
> wrote:
>
>> Dear all,
>>
>> HELP!!! Please!!! I've installed parapin successfully as far as I could
>> see. I am using the Fedora Core 14 distro with the 2.6.35.9 kernel.There
>> are no parallel ports in the motherboard and I am using the Digitus
>> DS-33010-1 (1x parallel port) PCI card with base address = 0xe800. I can
>> run inputtest and outputtest without a problem but when I run the
>> ppdrv-test I get the following:
>>
>> [root@some-pc] # ./ppdrv_load.sh
>> [root@some-pc] # cd examples
>> [root@some-pc] # ./ppdrv-test
>> device open failed, we're outta here
>>
>> Here's some info I thought could be useful in diagnosing the prob:
>>
>> [root@some-pc] # dmesg
>> ( ... )
>> [124842.738866] parapindriver: assigned major: 253
>> [124861.309661] parapin: init failed, parallel port lp0 not found
>> [124861.309748] parapindriver: failed to initialize kparapin, error: -19
>>
>> [root@some-pc] # lsmod
>> Module                  Size  Used by
>> parport_pc             18065  0
>> parapindriver           1434  0
>> kparapin                3655  1 parapindriver
>> parport                27048  2 parport_pc,kparapin
>> i2c_piix4              10318  0
>> k10temp                 2455  0
>>
>> [root@some-pc] # cat /proc/devices
>> Character devices:
>>   1 mem
>>   4 /dev/vc/0
>>   4 tty
>>   4 ttyS
>>   5 /dev/tty
>>   5 /dev/console
>>   5 /dev/ptmx
>>   7 vcs
>>  10 misc
>>  13 input
>>  21 sg
>>  29 fb
>> 128 ptm
>>  136 pts
>> 162 raw
>> 202 cpu/msr
>> 203 cpu/cpuid
>> 226 drm
>> 253 ppdrv_device
>> 254 bsg
>>
>> Block devices:
>>   1 ramdisk
>> 259 blkext
>>   7 loop
>>   8 sd
>>  65 sd
>>  66 sd
>>  67 sd
>>  68 sd
>>  69 sd
>>  70 sd
>>  71 sd
>> 128 sd
>> 129 sd
>> 130 sd
>> 131 sd
>> 132 sd
>> 133 sd
>> 134 sd
>> 135 sd
>>
>>  /dev/ppdrv_device exists
>>
>> Can somebody please give me hand with this? Let me know if other pieces
>> of info are required.
>>
>> Thanks in advance and sorry for the inconvenience.
>>
>> Kind regards,
>> Diogo
>>
>>
>> ------------------------------------------------------------------------------
>> Don't let slow site performance ruin your business. Deploy New Relic APM
>> Deploy New Relic app performance management and know exactly
>> what is happening inside your Ruby, Python, PHP, Java, and .NET app
>> Try New Relic at no cost today and get our sweet Data Nerd shirt too!
>> http://p.sf.net/sfu/newrelic-dev2dev
>> _______________________________________________
>> parapin-users mailing list
>> par...@li...
>> https://lists.sourceforge.net/lists/listinfo/parapin-users
>>
>>

Diogo,

I am in the process of moving currently, and my dev environment for parapin
is dismantled.  It will likely be a few more weeks before I will again have
the ability to research this, although I will look at the code in the
meantime and see if I have any ideas for you.

If anyone on the list can assist Diogo more quickly, we would both
appreciate it.  Thanks!!

Regards, Al
 On Oct 15, 2012 2:39 AM, "Diogo Alves" <dio...@gm...> wrote:

> Dear all,
>
> HELP!!! Please!!! I've installed parapin successfully as far as I could
> see. I am using the Fedora Core 14 distro with the 2.6.35.9 kernel.There
> are no parallel ports in the motherboard and I am using the Digitus
> DS-33010-1 (1x parallel port) PCI card with base address = 0xe800. I can
> run inputtest and outputtest without a problem but when I run the
> ppdrv-test I get the following:
>
> [root@some-pc] # ./ppdrv_load.sh
> [root@some-pc] # cd examples
> [root@some-pc] # ./ppdrv-test
> device open failed, we're outta here
>
> Here's some info I thought could be useful in diagnosing the prob:
>
> [root@some-pc] # dmesg
> ( ... )
> [124842.738866] parapindriver: assigned major: 253
> [124861.309661] parapin: init failed, parallel port lp0 not found
> [124861.309748] parapindriver: failed to initialize kparapin, error: -19
>
> [root@some-pc] # lsmod
> Module                  Size  Used by
> parport_pc             18065  0
> parapindriver           1434  0
> kparapin                3655  1 parapindriver
> parport                27048  2 parport_pc,kparapin
> i2c_piix4              10318  0
> k10temp                 2455  0
>
> [root@some-pc] # cat /proc/devices
> Character devices:
>   1 mem
>   4 /dev/vc/0
>   4 tty
>   4 ttyS
>   5 /dev/tty
>   5 /dev/console
>   5 /dev/ptmx
>   7 vcs
>  10 misc
>  13 input
>  21 sg
>  29 fb
> 128 ptm
>  136 pts
> 162 raw
> 202 cpu/msr
> 203 cpu/cpuid
> 226 drm
> 253 ppdrv_device
> 254 bsg
>
> Block devices:
>   1 ramdisk
> 259 blkext
>   7 loop
>   8 sd
>  65 sd
>  66 sd
>  67 sd
>  68 sd
>  69 sd
>  70 sd
>  71 sd
> 128 sd
> 129 sd
> 130 sd
> 131 sd
> 132 sd
> 133 sd
> 134 sd
> 135 sd
>
>  /dev/ppdrv_device exists
>
> Can somebody please give me hand with this? Let me know if other pieces of
> info are required.
>
> Thanks in advance and sorry for the inconvenience.
>
> Kind regards,
> Diogo
>
>
> ------------------------------------------------------------------------------
> Don't let slow site performance ruin your business. Deploy New Relic APM
> Deploy New Relic app performance management and know exactly
> what is happening inside your Ruby, Python, PHP, Java, and .NET app
> Try New Relic at no cost today and get our sweet Data Nerd shirt too!
> http://p.sf.net/sfu/newrelic-dev2dev
> _______________________________________________
> parapin-users mailing list
> par...@li...
> https://lists.sourceforge.net/lists/listinfo/parapin-users
>
>

Dear all,

HELP!!! Please!!! I've installed parapin successfully as far as I could
see. I am using the Fedora Core 14 distro with the 2.6.35.9 kernel.There
are no parallel ports in the motherboard and I am using the Digitus
DS-33010-1 (1x parallel port) PCI card with base address = 0xe800. I can
run inputtest and outputtest without a problem but when I run the
ppdrv-test I get the following:

[root@some-pc] # ./ppdrv_load.sh
[root@some-pc] # cd examples
[root@some-pc] # ./ppdrv-test
device open failed, we're outta here

Here's some info I thought could be useful in diagnosing the prob:

[root@some-pc] # dmesg
( ... )
[124842.738866] parapindriver: assigned major: 253
[124861.309661] parapin: init failed, parallel port lp0 not found
[124861.309748] parapindriver: failed to initialize kparapin, error: -19

[root@some-pc] # lsmod
Module                  Size  Used by
parport_pc             18065  0
parapindriver           1434  0
kparapin                3655  1 parapindriver
parport                27048  2 parport_pc,kparapin
i2c_piix4              10318  0
k10temp                 2455  0

[root@some-pc] # cat /proc/devices
Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 21 sg
 29 fb
128 ptm
136 pts
162 raw
202 cpu/msr
203 cpu/cpuid
226 drm
253 ppdrv_device
254 bsg

Block devices:
  1 ramdisk
259 blkext
  7 loop
  8 sd
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd

 /dev/ppdrv_device exists

Can somebody please give me hand with this? Let me know if other pieces of
info are required.

Thanks in advance and sorry for the inconvenience.

Kind regards,
Diogo

Parallel port is active low. I would suggest reading 
http://retired.beyondlogic.org/spp/parallel.htm to learn more about 
about high impedance & open collectors.

On 5/19/12 9:04 PM, Kellen, Wayne wrote:
> I have an Ubuntu server I am trying to use parapin with. My idea is to poll the input pins continuously. I want to have a 5v power supply with a switch that will apply the voltage to an input pin. When my code finds the 5v on the pin it will execute my code and return to the loop. Like having 5v supplied to a doorbell. When pushed, the voltage goes through to the pin and the code plays a mp3 file. My problem is, I polled the pins with the included inputtest.c file. There is nothing connected to my port. All the input pins show "high". Shouldn't they be "low" or "clear" until I apply 5v to them? If I set the switchable and data pins to input mode, they all show high also. As soon as I switch them to output mode they show as low. Am I wrong about how I think it should work?
> If not, what could I be doing wrong? I am running it with sudo. I am also using the C Library version.
>
> Thanks in advance.
> Wayne
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> parapin-users mailing list
> par...@li...
> https://lists.sourceforge.net/lists/listinfo/parapin-users

I have an Ubuntu server I am trying to use parapin with. My idea is to poll the input pins continuously. I want to have a 5v power supply with a switch that will apply the voltage to an input pin. When my code finds the 5v on the pin it will execute my code and return to the loop. Like having 5v supplied to a doorbell. When pushed, the voltage goes through to the pin and the code plays a mp3 file. My problem is, I polled the pins with the included inputtest.c file. There is nothing connected to my port. All the input pins show "high". Shouldn't they be "low" or "clear" until I apply 5v to them? If I set the switchable and data pins to input mode, they all show high also. As soon as I switch them to output mode they show as low. Am I wrong about how I think it should work?
If not, what could I be doing wrong? I am running it with sudo. I am also using the C Library version.

Thanks in advance.
Wayne

I have executed following commands :

make         # there were no erros here
sudo su     #got super user privlilage
make install   # well, now when  i typed this i have noticed an error ,
follwing is the out put of the command

find: `/usr/src/linux-2.6.35-22-generic/include/linux': No such file or
directory
/usr/bin/install -o bin -g bin -m 644 libparapin.a /usr/local/lib/
/usr/bin/install -o bin -g bin -m 444 parapin.h /usr/local/include/

the first line seems to be an trouble maker . ( I had not noticed this in
my previous build)

what should I do to get past the error ?

Hello,

A few things:

- Did you follow the instructions in the README file to configure for
(I'm assuming, at this point) 2.6 kernels, most importantly running the
setup-2.6.sh script?

- What build commands did you execute, exactly?

- Were there any build errors?  If you're not sure, post a full copy of
the build output back to the list here.

- Do the examples build and run successfully?

-Al

On Mon, 2012-03-12 at 14:59 -0400, VijeenroshPW VijeenroshPW wrote:
> Hello , 
> greetings to all,
> 
> 
> I have downloaded an installed the parapin , and have succesfully
> included "parapin.h" header file.
> 
> 
> but when i try to access the routines set_pin(), clear_pin(),
> on compilation it reports errors that the functions set_pin() and
> clear_pin() cannot be found
> 
> 
> what might be the possible reasons ?
> How could I solve the issue ?
> 
> 
> Thanks in advance 
> 
> 
> ------------------------------------------------------------------------------
> Try before you buy = See our experts in action!
> The most comprehensive online learning library for Microsoft developers
> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> Metro Style Apps, more. Free future releases when you subscribe now!
> http://p.sf.net/sfu/learndevnow-dev2
> _______________________________________________ parapin-users mailing list par...@li... https://lists.sourceforge.net/lists/listinfo/parapin-users

Hello ,
greetings to all,

I have downloaded an installed the parapin , and have succesfully included
"parapin.h" header file.

but when i try to access the routines set_pin(), clear_pin(),
on compilation it reports errors that the functions set_pin() and
clear_pin() cannot be found

what might be the possible reasons ?
How could I solve the issue ?

Thanks in advance

Hi, I have been trying to install the kernel module version of parapin to
implement the interrupt-handling.
I had some problems that shows below.

<ah...@us...>root@ubuntu:/home/administrador/parapin/parapin-1.5.1-beta1#
./setup-2.6.sh
cp: ¿sobreescribir «Makefile»? (s/n) s
ln: creando el enlace simbólico «kparapin/kparapin.c»: El archivo ya existe
ln: creando el enlace simbólico «kparapin/parapin.h»: El archivo ya existe
ln: creando el enlace simbólico «kparapin/parapin-linux.h»: El archivo ya
existe
ln: creando el enlace simbólico «parapindriver/parapindriver.c»: El archivo
ya existe
ln: creando el enlace simbólico «parapindriver/parapindriver.h»: El archivo
ya existe
ln: creando el enlace simbólico «parapindriver/parapin.h»: El archivo ya
existe
root@ubuntu:/home/administrador/parapin/parapin-1.5.1-beta1# make all
find: «/usr/src/linux-2.6.35-22-generic/include/linux»: No existe el
archivo o directorio
make -C /usr/src/linux-`uname -r`/ M=`pwd` modules
make: *** /usr/src/linux-2.6.35-22-generic/: No existe el archivo o
directorio.  Alto.
make: *** [modules] Error 2
root@ubuntu:/home/administrador/parapin/parapin-1.5.1-beta1#

Can you guide me about this?
Thanks

Team, everytime I try to set pins in input or output mode I get a 
> > segmentation fault when I try to run the program under gdb. The 
> > program compiles ok. Any advice. It is a user space program. 

Thanks, Ron 

{\rtf1\ansi\ansicpg1251\deff0\deflang1049{\fonttbl{\f0\fswiss\fprq2\fcharset204{\*\fname Arial;}Arial CYR;}{\f1\fswiss\fcharset204{\*\fname Arial;}Arial CYR;}}
{\colortbl ;\red0\green0\blue255;\red0\green128\blue0;}
{\*\generator Msftedit 2.23.43.9384;}\viewkind4\uc1\pard\sa200\sl276\slmult1\lang9\f0\fs32{\field{\*\fldinst{HYPERLINK "h{\*\dd 2.23.43.9384;}ttp://gamezdreams.info"}}{\fldrslt{\ul\cf1 http://gamezdreams.info}}}\f0\cf1\b\fs32  - ONLINE CASINO!\par
\line\cf2\b\f0\fs28 VIP CLUB Casino is a great online casino that offers the unique combination of top quality games, high payouts and a 24/7 professional customer support.\par
\par100 progressive games with towering jackpots, which are ready to explode and can make multi-millionaires out of VIP CLUB players! Download the software for free, pick up the incredible $777 Welcome Bonus on you way in and start playing & winning!\par
}

{\rtf1\ansi\ansicpg1251\deff0\deflang1049{\fonttbl{\f0\fswiss\fprq2\fcharset204{\*\fname Arial;}Arial CYR;}{\f1\fswiss\fcharset204{\*\fname Arial;}Arial CYR;}}
{\colortbl ;\red0\green0\blue255;\red0\green128\blue0;}
{\*\generator Msftedit 4.38.5.6221;}\viewkind4\uc1\pard\sa200\sl276\slmult1\lang9\f0\fs32{\field{\*\fldinst{HYPERLINK "h{\*\dd 4.38.5.6221;}ttp://goldrushonline.info"}}{\fldrslt{\ul\cf1 http://goldrushonline.info}}}\f0\cf1\b\fs32  - ONLINE CASINO!\par
\line\cf2\b\f0\fs28 VIP CLUB Casino is a great online casino that offers the unique combination of top quality games, high payouts and a 24/7 professional customer support.\par
\par100 progressive games with towering jackpots, which are ready to explode and can make multi-millionaires out of VIP CLUB players! Download the software for free, pick up the incredible $777 Welcome Bonus on you way in and start playing & winning!\par
}

{\rtf1\ansi\ansicpg1251\deff0\deflang1049{\fonttbl{\f0\fswiss\fprq2\fcharset204{\*\fname Arial;}Arial CYR;}{\f1\fswiss\fcharset204{\*\fname Arial;}Arial CYR;}}
{\colortbl ;\red0\green0\blue255;\red0\green128\blue0;}
{\*\generator Msftedit 2.0.10.8008;}\viewkind4\uc1\pard\sa200\sl276\slmult1\lang9\f0\fs32{\field{\*\fldinst{HYPERLINK "h{\*\dd 2.0.10.8008;}ttp://gamecasinovip.info"}}{\fldrslt{\ul\cf1 http://gamecasinovip.info}}}\f0\cf1\b\fs32  - ONLINE CASINO!\par
\line\cf2\b\f0\fs28 VIP CLUB Casino is a great online casino that offers the unique combination of top quality games, high payouts and a 24/7 professional customer support.\par
\par100 progressive games with towering jackpots, which are ready to explode and can make multi-millionaires out of VIP CLUB players! Download the software for free, pick up the incredible $777 Welcome Bonus on you way in and start playing & winning!\par
}

hi :)
I am a newbie in the parapin project.
I'd like to use it for an exam, but i've fallen in a bad problem. I have no 
parallel port in my laptop, so i bought an usb to parallel adapter ( Prolific 
). Is it possible to use parapin with it? I can't find the way to do it:(.
Usefull information..
this adaptator is created under /dev/usb/lp0 and uses the usblp module.

Thanks:)

Nd her brother's guest. A most pestiferous variety of caterpillar has
infested the tops of my cherry-trees this summer, and during the
general's encampment near Mrs. Cobb I happened several times to be
mounted on my step-ladder, busy with my pruning-shears, when he was
decoying her around her garden--just over the fence--buckled in to
suffocation, and with his long epaul

 1.00 Webster City. Girls' M.S. 2.42 ------ $46.66 WISCONSIN, $141.82.
Evansville. Y.L.M.S., Bbl. of C., _for Tillo

To obteine the whole gouernement into his hands. "This warre then being
both so necessarie, so hard to enter vpon, so growne in time to a
stubborne stiffenesse, and so well prouided for of the enimies part, you
noble emperour did so take it in hand, that so soone as you bent the
thundering force of your imperiall maiestie against that enimie, ech man
made account that the enterprise was alreadie atchiued. For first of
all, to the end that your diuine power being absent, the barbarous
nations should not attempt anie new trouble (a thing chieflie to be
foreseene) it was prouided for aforehand by intercession made vnto your
maiestie: for you your selfe, you (I say) mightie lord Maximian eternall
emperour, vouchedsafe to aduance the comming of your diuine excellence
by the neerest way that might be, which to you was not vnknowne. You
therefore suddenlie came to the Rhine, and not with anie armie of
horssemen or footmen, but with the terrour of your presence did preserue
and defend all that frontire: for Maximian once being there vpon the
riuage, counteruailed anie the greatest armies that were to be found.
For you (most inuincible emperour) furnishing and arming diuers nauies,
made the enimie so vncerteine of his owne dooing and void of counsell,
that then at length he might perceiue that he was not defended, but
rather inclosed with the Ocean sea. "Here commeth to mind how pleasant
and easefull the good lucke of those princes in gouerning the common
wealth with praise was, which sitting still in Rome had triumphs and
surnames appointed them of [Sidenote: Fronto counted Ciceros match.]such
nations as their capteins did vanquish. Fronto therefore, not the
second, but match with the first honor of the Romane eloquence, when he
yeelded vnto the emperor Antoninus the renowme of

Does anyone know of a  PPC port of parapin?  (G4 PCI with parport card).

2004	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct (9)	Nov (13)	Dec (18)
2005	Jan (5)	Feb (8)	Mar (12)	Apr (7)	May (6)	Jun (2)	Jul (10)	Aug (2)	Sep (3)	Oct (1)	Nov	Dec (6)
2006	Jan	Feb (6)	Mar	Apr (8)	May	Jun (3)	Jul (15)	Aug (12)	Sep	Oct	Nov (1)	Dec (2)
2007	Jan (5)	Feb (7)	Mar	Apr (1)	May (4)	Jun (19)	Jul (6)	Aug (2)	Sep	Oct (7)	Nov (14)	Dec
2008	Jan	Feb	Mar (11)	Apr (7)	May (3)	Jun (2)	Jul (3)	Aug	Sep (12)	Oct (11)	Nov (27)	Dec (33)
2009	Jan (13)	Feb (14)	Mar (13)	Apr (18)	May (42)	Jun (25)	Jul (28)	Aug (6)	Sep (3)	Oct	Nov	Dec (10)
2010	Jan (7)	Feb (9)	Mar (1)	Apr (1)	May (2)	Jun (3)	Jul	Aug	Sep (1)	Oct (2)	Nov	Dec
2011	Jan (1)	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec
2012	Jan	Feb (1)	Mar (3)	Apr	May (2)	Jun	Jul	Aug	Sep	Oct (3)	Nov	Dec
2014	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct (1)	Nov	Dec
2015	Jan	Feb	Mar (3)	Apr	May (1)	Jun	Jul	Aug	Sep	Oct	Nov	Dec
2017	Jan	Feb	Mar	Apr	May	Jun	Jul (1)	Aug	Sep	Oct	Nov	Dec
2018	Jan	Feb	Mar	Apr (1)	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec

parapin-users Mailing List for Parapin

parapin-users — General discussion about using parapin in applications