Hi! I was trying moto4lin, but it could recognize my mobile phone. Could somebody tell me please, what am I doing wrong?
p2ktest gave:
P2k Test
Device list:
0000:0000: [Linux 2.6.14-archck3 uhci_hcd] [UHCI Host Controller]
22b8:4810: [Motorola Inc.] [Motorola Phone (L7)]
0000:0000: [Linux 2.6.14-archck3 uhci_hcd] [UHCI Host Controller]
No phone found.
I have 2.6.14-archck3 and compiled cdc-acm as a module (loaded before i connected mobile through USB)
Don't know why my mobile is not recognized as modem... According to http://moto4lin.sourceforge.net/wiki/L7, it should work, but in moto4linux I get only:
[info] Switching device /dev/ttyACM0 to P2K mode...
[error] Unable to open device
[error] Please check preferences
Whoops. Sorry, it IS working. The problem wasn't where I was searching for it. :D
In L7,Connectivity Settings->USB->Default Connection changed from Memory Card to Data/Fax Connection and everything is fine - just one little problem - when I was trying to create new folder, phone went black, wasn't responding to any key (even not to on/off) and I had to take battery from it and put it back. After starting, the folder wasn't there...
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi! I was trying moto4lin, but it could recognize my mobile phone. Could somebody tell me please, what am I doing wrong?
p2ktest gave:
P2k Test
Device list:
0000:0000: [Linux 2.6.14-archck3 uhci_hcd] [UHCI Host Controller]
22b8:4810: [Motorola Inc.] [Motorola Phone (L7)]
0000:0000: [Linux 2.6.14-archck3 uhci_hcd] [UHCI Host Controller]
No phone found.
/proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=22b8 ProdID=4810 Rev= 0.01
S: Manufacturer=Motorola Inc.
S: Product=Motorola Phone (L7)
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=ub
E: Ad=01(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
C: #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=
E: Ad=01(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I have 2.6.14-archck3 and compiled cdc-acm as a module (loaded before i connected mobile through USB)
Don't know why my mobile is not recognized as modem... According to http://moto4lin.sourceforge.net/wiki/L7, it should work, but in moto4linux I get only:
[info] Switching device /dev/ttyACM0 to P2K mode...
[error] Unable to open device
[error] Please check preferences
/dev/ttyACM0 is right:
crw-rw---- 1 root uucp 166, 0 2005-07-12 23:07 /dev/ttyACM0
Thanks in advance.
Whoops. Sorry, it IS working. The problem wasn't where I was searching for it. :D
In L7,Connectivity Settings->USB->Default Connection changed from Memory Card to Data/Fax Connection and everything is fine - just one little problem - when I was trying to create new folder, phone went black, wasn't responding to any key (even not to on/off) and I had to take battery from it and put it back. After starting, the folder wasn't there...